nissan sentra 2002 door set with panel available in banawe?

[oninsing]

hi mga sentra clubbers. need you help. i just bought a nissan sentra 2002 model grandeur body, mura ko sya nabili 140k pero may mga sira sa doors nya.. yung sa driver side hindi na align, pina check ko sabi yung bisagra daw at bushing sinnugest na bumili na daw ako ng whole door nya then yung isa din beside the driver side medyo ganun. although tolerable pa naman need lang isarado ng ubod ng lakas. im planning to buy the 4 set doors may surplus ba nito sa banawe? kasama na ba yung interior panel at power windows amenities pag binili ko sya? any ideas guys? kakabili ko lang sya kahapon. nakamura nga ko pero mukhang sasakit ulo ko please need you reply. TIA.

[oninsing]

ned you comments guys.

[vinj]

If your doors are in generally good condition and buo pa (metal and hindi panay filler), i'd go with the machine shop option with your current door hinges. We do that with our old cars and it always works.

[OTEP]

Vinj is correct. Normal nissan weakness iyan.

If you buy a new door, you will need to transfer the other parts from the old door. Its not hard to do. We do that for collision repairs.

[vinj]

Vinj is correct. Normal nissan weakness iyan.

Lahat ng Nissan namin, pag patak ng mga 50,000km mileage, umusog na yung driver's door hinges.

[oninsing]

sabi kase nung mekaniko is puro masilya na daw yung pintung yun. then yung hinge nya sira pati yung kumakapit sa lock sira na din. sabi kung pipira pirasuhin its better to buy a new door? hmm... machine shop pala. try ko din muna yun. when you say machien shop mga metal shop ba yun? yung mga nag ssteel fabrication?

[dr. d]

sabi kase nung mekaniko is puro masilya na daw yung pintung yun. then yung hinge nya sira pati yung kumakapit sa lock sira na din. sabi kung pipira pirasuhin its better to buy a new door? hmm... machine shop pala. try ko din muna yun. when you say machien shop mga metal shop ba yun? yung mga nag ssteel fabrication?

well, kung bugbog na bugbog na talaga yung pintuan, i guess you can justify replacing the door..
but kung bisagra lang, machine shop or surplus part lang yan.. i hope you can get a complete, good-priced decent surplus door..

[oninsing]

ganun pala. hindi na kaya nung mekaniko ko eh kaya nya sinuggest yung new door. pa 2nd opinion ko kaya? then yung isang door eh walang power windows, as in wala yung mechanism ng isang door per panel naman ang parts nun noh? takot ako baka pabilin sakin yung 4 side ng door. medyo madumi na din yung interior. dami alikabok i dont know kung nabaha ba to or ano pero magkano kaya aabutin ng interior restoration? any idea guys? may mga missing parts n kase yung center console at mga sidings.

[vinj]

Yes, in that case it's better to buy a new door if you ask me tapos sabay mo na sa full body repair para fresh.

Try searching for a surplus set although pahirapan siguro. Baka mayroon galing sa mga na-Ondoy na units.

[acidkizz20]

madali lang i allign yan sir.tanggalin mo lang muna ung fenders then makikita mo dun mga screws ng pinto mo luwagan mo lahat pero wag mo tanggalin bago pa angat mo ung pinto bago ilapit sa hinges na malapit sa body.tignan mo kung nasa gitna ang tama sa lock ng pinto saka mo higpitan lahat ng screws