2022 Nissan Almera

[ice15]

(4th Generation)

Did Nissan PH just tease the all-new Almera? | TopGear PH



Nissan PH drops teaser of all-new Almera | Autoindustriya

For starters, we now know that the 2022 Almera will use a new turbocharged engine. It will be similar to the Thai-spec model which uses a 1.0-liter turbocharged inline-three that produces 120 PS with 152 Nm of torque. It will then send power to the front wheels via a continuously variable transmission (CVT).

[dr. d]

(4th Generation)

Did Nissan PH just tease the all-new Almera? | TopGear PH



Nissan PH drops teaser of all-new Almera | Autoindustriya

masyado namang kuripot yang teaser na 'yan!
jatco ba yung cvt?

when nissan announced a few months ago a fire sail for their outgoing almeras,
i rushed over, only to be told that their AT models had already been sold out.

[yapoy86]

galing.. dami na naka small displacement 3 cyl turbo engines.. hehe

may nabasa ako dati na sa japan, parang test bed nila yung mga kei cars... kaya madami mga kei cars na full spec'd like turbo engine at electric power steering since 80's pa

pero now, halos lahat ng new cars yan na ang trend..

[GTcervan]

Naging honda city gm6 na yung hitsura.

[thearsenal1205]

Hope the base engine will be a NA four cylinder used on the previous almera.

[babkalakal]

galing.. dami na naka small displacement 3 cyl turbo engines.. hehe

may nabasa ako dati na sa japan, parang test bed nila yung mga kei cars... kaya madami mga kei cars na full spec'd like turbo engine at electric power steering since 80's pa

pero now, halos lahat ng new cars yan na ang trend..

super liit 660cc 3cyl turbo limited to 63hp. i have not ridden any modern 3cyl cars. in terms of smoothness malaki ba difference sa typical 4cyl. natin?

[Egan101]

For almost 5 years, I had the Fiesta Ecoboost. Despite its small 997cc 3-cylinders, turbocharging made it a potent powerplant for the Fiesta. The Asian tune is set to 125hp * 6k rpm and 170Nm * 1800 rpm with an overboost function pushing torque to 200Nm from 4500 rpm onwards.

The engine does rev higher at idle rpm compared to the usual 1.3L to 1.6L 4-cylinder engines (950 rpm vs 700 rpm). However, power and torque delivery is better than a 1.6L NA. There is noticeable turbo lag but once the engine revs at 2k rpm, the engine just goes alive and the tach just goes to 6k rpm easily.


Sent from my iPhone using Tapatalk

[hardwang]

masyado namang kuripot yang teaser na 'yan!
jatco ba yung cvt?

when nissan announced a few months ago a fire sail for their outgoing almeras,
i rushed over, only to be told that their AT models had already been sold out.

Oh no! Jatco cvt!

[Dr.Kamiya]

For almost 5 years, I had the Fiesta Ecoboost. Despite its small 997cc 3-cylinders, turbocharging made it a potent powerplant for the Fiesta. The Asian tune is set to 125hp * 6k rpm and 170Nm * 1800 rpm with an overboost function pushing torque to 200Nm from 4500 rpm onwards.

The engine does rev higher at idle rpm compared to the usual 1.3L to 1.6L 4-cylinder engines (950 rpm vs 700 rpm). However, power and torque delivery is better than a 1.6L NA. There is noticeable turbo lag but once the engine revs at 2k rpm, the engine just goes alive and the tach just goes to 6k rpm easily.


Sent from my iPhone using Tapatalk

Is that 200Nm of torque during overboost mode sustained until redline? If it is then the car is actually making something like 168hp in overboost mode

200 Nm = 147.51 lb-ft
147.51 lb-ft * 6000rpm / 5252 = 168.51 hp

[thearsenal1205]

jatco ba yung cvt?

i wish it has an Aisin CVT.