New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 1 of 3 123 LastLast
Results 1 to 20 of 48

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. Join Date
    Feb 2004
    Posts
    1,704
    #1
    guys, i contacted glennster and tingnan pa daw nya kung may stock sila.

    kung wala silang stock, where else can i get these? gusto ko talagang maglagay ng 33 inch tires sa pajero ko.

    kung 32 inch tires lang, kailngan ko pa ba ng spacers? if so, pwede 1 inch na lang instead of 2 inch? and pwede ba itong spacer ay gawa-gawa lang? nasa gen. santos kasi ako, medyo malayo sa manila.

    andy

  2. Join Date
    Oct 2002
    Posts
    10,603
    #2
    If you could get hold of a copy and have it fabricated then yeah...oks yun. Lalo na pag mas magandang material like Polyurethane.

  3. Join Date
    Oct 2002
    Posts
    6,794
    #3
    some guy bought 8 pcs last week.dipa dumadaan ung ahente namin...try nalang muna the others..i dunno when dadating and im kinda busy din with school.

  4. Join Date
    Oct 2002
    Posts
    10,620
    #4
    glennster fafa, tanong ko lang kung kasya yang mga spacers ninyo sa trooper?

  5. Join Date
    Feb 2004
    Posts
    1,704
    #5
    glenn, keep me posted kung merong dumating pare.

    how about the question about the 32" tires? kailangan pa ba ng spacer?

    nandito pa kaya yung picture ng spacer na nasa kamay ni otep? hanapin ko nga

    andy

  6. Join Date
    Oct 2002
    Posts
    22,658
    #6
    32" will fit without a spacer.

    I have the spacer pic on file in my home computer.

    Madaming naglalako ng spacer sa Banawe ngayon. Target market nila yung mga rice boys who want that 'jacked-up ass' look for their rice rockets.

    http://docotep.multiply.com/
    Need an Ambulance? We sell Zic Brand Oils and Lubricants. Please PM me.

  7. Join Date
    Feb 2004
    Posts
    1,704
    #7
    otep, found the pic in your gallery, took me about 30 mins, ang dami mo palang pics

    i tried to copy it to print it out kaso protected ata. maybe you could email me the pic? i just want to print it or store it in my palm so that i can show it to my friend who does a lot of fabrication with industrial plastic. maybe he can make a pair for me. ok lang sa iyo pare?

    thanks,

    andy

  8. Join Date
    Oct 2002
    Posts
    22,658
    #8
    Hindi mo ba pwede i-print yung screen?

    O kaya use the cntr-C command. Post mo sa thread para maprint mo.

    http://docotep.multiply.com/
    Need an Ambulance? We sell Zic Brand Oils and Lubricants. Please PM me.

  9. Join Date
    Feb 2004
    Posts
    1,704
    #9
    lunch muna ako sa bahay tapos pagbalik ko, i'll figure out a way to print it

    andy

  10. Join Date
    Oct 2002
    Posts
    5,235
    #10
    nag fabricate kami ni ferdie ng front coil spacer sa patrol. 2inches ok naman no more bouncing as against sa rubber spacer. IMO 1 inch spacers would be enough and it won't compromise your ride.

  11. Join Date
    Feb 2004
    Posts
    1,704
    #11
    afarssay, when you said 1 inch spacers would be enough, was that for a 33" tire?

    what material did you use? i am thinking some kind of industrial plastic, yung pang fabrication talaga.

    yung friend ko rin na may safari. sariling fabricate lang ang coild spacers for front and rear to fit 32 inch tires. mukhang kaysa pa nga ang 33"

    andy

  12. Join Date
    Feb 2004
    Posts
    1,704
    #12
    finally able to print it. will be taking the pic to my suking fabricator.

    what material do you guys suggest. and for 33" tires, okay na ba ang 1" or 1.5" or 2". the lower the better because i don't want to have to crank my t-bars too much to make it pantay.

    ganito na lang, kung 32", no spacer or 1 inch spacer? kung 33", 1" spacer or 1.5" or 2" spacer?

    thanks again,

    andy

  13. Join Date
    Feb 2004
    Posts
    1,704
    #13
    bump ko lang mga bosing

    andy

  14. Join Date
    Oct 2002
    Posts
    22,658
    #14
    Polyurethane works great. Billet steel/aluminum also works (gamit ng 199 Off-Road House).

    If you put in spacers, you will still have to crank your torsion bar a little to compensate for the added rear ride height.

    http://docotep.multiply.com/
    Need an Ambulance? We sell Zic Brand Oils and Lubricants. Please PM me.

  15. Join Date
    Feb 2004
    Posts
    1,704
    #15
    i think i will just wait for the stock of spacers of glenn. sabi ng maintennance supervisor namin, mahal daw ang magpagawa.

    aside from glenns shop, anyone else know where to get these?

    andy

  16. Join Date
    Feb 2004
    Posts
    1,704
    #16
    my friendly fabrication outfit is not so friendly pala, P1500 per piece ang quote aray!!!!!!

    si glennster na lang talaga ang pag-asa ko.

    i had a welcome surprise kanina. nung sinisilip namin ang coils and ang bumpstops, nakita ko na naka rancho 5000 na pala ako. i checked all four and they are all matched. ang bait naman ng previous owner, binigyan ako ng magandang shocks

    that made my day. what will make my day even better is if i can find some coil spacers

    andy

  17. Join Date
    Oct 2002
    Posts
    3,012
    #17
    me din rancho 5000. lucky ka nga.

  18. Join Date
    Oct 2002
    Posts
    3,012
    #18
    andy,
    yung akin pala 2.5in coil springs, lucky me got it for 3k plus trade in ko yung rubber spacers ko.

  19. Join Date
    Oct 2002
    Posts
    6,794
    #19
    wait up

  20. Join Date
    Sep 2004
    Posts
    59
    #20
    glennster: un spacer mo ba rubber o billet? meron ka bang pang trooper? 2inch?
    otep: pare un kay 199 ofroad ba may pang trooper sya na billet? mga magkanu cost nya?
    tnx

Page 1 of 3 123 LastLast
coil spacers for rear & cheap mags for pajero gen 2