leaky roof

**badkuk** · May 5th, 2013 07:46 PM

Originally Posted by vinj

Check also for water seepage from the walls and gutters.

Isa pang problema yan; one side of the room "cries" when it rains. Nagkataon pang nasa taas ng wall socket. Am thinking about disconnecting it na lang, mahirap na

**jaypee10** · May 5th, 2013 07:52 PM

ako ginamitan ko ng cord marine epoxy tibay!!!

sa akin honda singlaki ng piso ang butas nakana pa ni cordmarine epoxy

sa unang apply parang hindi kakapit at malabnaw..pero kapag natuyo...potek sing tigas talaga ng bato sing tibay ng isang sakong semento ..
2years na dipa naman bumibigay..

**_Cathy_** · May 5th, 2013 08:55 PM

That's a very expensive problem

OT: May thread dati dito on asphalt shingles. Maganda siya pero maganda din presyo. hehehe.

**bobzy** · May 5th, 2013 09:13 PM

mejo nalilito lang po ako. are we talking about house roof or car roof??

**_Cathy_** · May 5th, 2013 09:31 PM

Originally Posted by bobzy

mejo nalilito lang po ako. are we talking about house roof or car roof??

Hindi ba house roof kasi the TS mentioned dugtong and nailpoint.

Pero bigla rin nga ako nalito :rofl:

**bobzy** · May 5th, 2013 10:54 PM

Originally Posted by Cathy_for_you

Hindi ba house roof kasi the TS mentioned dugtong and nailpoint.

Pero bigla rin nga ako nalito :rofl:

sorry may bigla kasi sumagot na "from his honda"...

**_Cathy_** · May 5th, 2013 10:59 PM

Originally Posted by bobzy

sorry may bigla kasi sumagot na "from his honda"...

hehe. I thought I made a mistake too and had to read the TS' post again

But really, leaking roofs are very expensive. Minsan kasi pag nagpapagawa ang dami pang ibang nakikita na hawa hawa na

**jaypee10** · May 6th, 2013 02:46 PM

ano nga ba kasi pagkaka iba ng tagas o butas ng bubong ng bahay sa bubong ng sasakyan...
diba pareho lang butas un na kailngan tapalan,,

**number001** · May 7th, 2013 04:27 PM

Vulcaseal is no good at all. It merely possesses an excellent brand recall in the same light as Silver Swan, Colgate, Xerox, Kleenex, etc...

You need to use silicone based sealant. Not just any ordinary silicone sealant for the sink but make very sure its NON ACIDIC.

As for the "dugtong", it could be the previous installer failed to provide adequate overlapping of GI sheets, which will lead to immediate leaks if a sheet's overlap suddenly rises when it becomes unfastened by the wind or loose nailer.