Wheel bore vs Hub bore? Help pls.

[dantevarona]

Mga sir bibili na sana ako ng mags kanina but i noticed na lahat ng

Aftermarket wheels na gusto ko has a larger hub opening than the stock hub size.

Ok lang ba yun? May mga gumagamit ba sa inyo ng "hub rings" and san nakakakuha nun?

Di ba masama kung puro stud lang ang humahawak sa weight ng car? thanks again

[Type 100]

I just had hub-centric rings fabricated at Autoplus. They cost me PhP2000 for a set of four.

The center spigot should mount flush with the wheel's center bore as it should carry the weight of the car, not the wheel studs. The studs were never designed to carry weight, so if they become load-bearing structures they can shear off the hub assembly due to the strain. You can say bye-bye wheel then.

Here is the wheel on my car without a hub-centric ring. Notice the gap between spigot and center bore.


Here is the wheel after fitment of a custom-fabricated hub-centric ring. The wheel now sits flush with the spigot.


Lastly here are the rings themselves.

[laracroft]

2K? medyo mahal siya ah.
di ba pwede sa ordinary
machine shop magpagawa?

[Type 100]

Pwedeng-pwede sa suking machine shop basta alam nila yung measurements.

[dantevarona]

sa c.c. barleta sa may sucat paranaque 200p each. pero mas ok siguro sa autoplus kasi mas marami nag papagawa ng hub rings dun.

[Biggs]

Saan pang machine shop ang nagpa-fabricate ng hubcentric rings?

[xvanquish]

Saan pang machine shop ang nagpa-fabricate ng hubcentric rings?

ngaung 2014 san na nagpapagawa ng hub centric rings at how much na cya?

[xvanquish]

nagtanong ako sa barleta, para sa montero 2k daw ang isa.

sa autoplus naman, sabi sakin nung unang kausap ko 3.2k daw estimate nila sa mga nagpagagawang montero. tapos dun sa sumunod na kausap ko naging 2.5k naman ang isa.

ayus.