Replacing Wheels

[robgowild]

I have a question guys. Is it recommended to use a lower offset and wider wheel than the OEM wheels.

I'm planning to put 17x7 48 offset to replace my 17x6.5 52.5 offset wheels. Any advise guys kung okay lang ba eto?

[[archie]]

Short answer is no. Stay with in the manufacturer specs. Luluwa yung mags...

Konting load, may rubbing issue na.

[saksidriver]

Kung talagang trip mo yung wheels why not. Hindi naman masyado nagkakalayo ng offset saka lapad eh. Kung may rubbing, just do fender tuck. Yung iba nga wild ng offset pwede eh. Yan sayo ok pa yan. Hindi pa yan yung nasa "stance" category. Pasok pa yan sa form and function.


Posted via Tsikot Mobile App

[nhel0719]

Pagnaka stace yan yung mga nakatagilid n yung wheels? Tama ba? Di ba camber kit ang nakalagay pag ganon

Oops ot pala:D

[saksidriver]

Yung rim na gusto naman ni Ts mukhang conservative naman ang width and offset. Ang mga ginagamit kasi sa stance yung sobrang baba ng offset.


Posted via Tsikot Mobile App

[[archie]]

I would rather have the correct offset than risk rubbing issue and fender roll na pwede simulan ng rust.

[saksidriver]

Yup. But those rims na na mention ni ts eh almost same spec sa OEM niya. Di gaanong malayo. So he can go ahead anytime. Kung talagang trip niya yung rims. Mind you, it's hard to find an aftermarket rims na same spec as your oem unless siguro pasadya ka pagawa. So most likely hindi na niya kakailanganin mag fender role. But i beg to disagree na takaw kalawang at takaw bulok kapag naka fender role. Mine was fender roled 5 years ago and no problems so far about rusting issue.


Posted via Tsikot Mobile App

[robgowild]

thanks for the info guys. Tama ka nga sir saksidriver, according to Online Wheel and Tyre Fitment Calculator. Offset, Tyre Stretch and Speedo Error | Will They Fit di sila nagkakalayo and di masyado magkalayo spec nya s OEM.

So next question ko naman is kung anong tires kaya mas bagay. I currently use 215/45/17. Okay na kaya eto or my other choices are 225/45 and 225/40. Kung 225/45 hindi kya mag rub sa fender yung tires , anu kaya sa tingin nyo?

[saksidriver]

Well kung naka 215 ka na naman pwede na yan na muna gamitin mo. Try mo muna kung gaano ka forgiving ang wheel well mo. Try mo tanchahin kung pwede pa mag 225. Hindi naman malayo yung width ng rims na ipapalit mo. Baka mas gumanda pa ang itsura ng pagkabalot ng 215 na goma mo kasi 7 na width ng rims mo. Kasi kung mag 225 ka, may risk nga na mag rub sa fender. Kasi nagbawas ka ng offset so medyo lalapit sa fender yan.


Posted via Tsikot Mobile App

[[archie]]

Kung within manufacturer recommendation ok lang.

Siguro Swerte ka na sa fender roll na walang rust. Marami sa mga shop na kilala ko bumabalik customers kasi sinimulan ng kalawang.

Well wala naman ako pakialam since car niyo yan. Sige lang... Fender roll lang. Basta walang sisihan.

[Montz]

Mga Sir.. question lang, safe kaya 22' mags for montero? hindi ba takaw bengkong kung goma is 285 40 R22? advise please. torn ako sa 20 at 22 rim size for montero sana mga sir. any suggestions? thanks!

[Aoshinomori]

Kung hindi malubak ang dadaanan ok lang siguro malaking rim vs goma. Kung sa edsa dadaan, kelangan yata makapal na goma vs rims.

[sientobente]

Mga Sir.. question lang, safe kaya 22' mags for montero? hindi ba takaw bengkong kung goma is 285 40 R22? advise please. torn ako sa 20 at 22 rim size for montero sana mga sir. any suggestions? thanks!

Maganda yang 22" sir. With those specs, the sidewall would still be 4.49", so hindi naman masyadong manipis. If in doubt, I think kaya pa ng tire well ng Monty natin ang 45 or even 50 series. Yun lang may difference na sa odometer reading natin.

[Montz]

noted sir, another thing is ok lang ba na yung goma sa harap is 285 40 r22? then sa likod is 305 40 r22? may magiging problem ba pag ganito set of tires sir? thanks!

[Bin Diesel]

Kapag nagpalit ng mags mas malaki yung center bore diba? Kailangan ba magpalagay pa ng center ring?

[jick.cejoco]

noted sir, another thing is ok lang ba na yung goma sa harap is 285 40 r22? then sa likod is 305 40 r22? may magiging problem ba pag ganito set of tires sir? thanks!

If you have four channel antilock brakes, yes, big problem

If you have all wheel drive,yes bigger problem

[saksidriver]

Marami din naman ako kilala na nakapagpa fender roll na walang problema. Well maybe nasa competency na din ng shop na nagfe fender roll. Malas na lang siguro nung shop na kakilala mo, marami nagkaproblema sa kalawang after nila i fender roll. Baka pukpok method yun hindi ginamitan ng roller.. Hehe.


Posted via Tsikot Mobile App

[[archie]]

Ahh OK. Papafender roll ako sayo. OK lang ba bigyan mo ko warranty 5 years? Para wala ako kaba na mag kalawang.

[saksidriver]

And now gusto mo na magpa fender role? Hehe. Wala ka naman yata rubbing issue kasi sinunod mo yung manufacturer's spec ng rims eh. Bakit ka pa papa fender role? What's the point. Tinanong ni ts kung pwede yung rims niya, sinagot mo agad "NO". Hindi mo pa nga alam kung pasok yung rims niya. Porket nag iba lang offset saka width no na agad. Hehe. Pag sumabit eh di balik stock. Hehe. Kung gusto niya i fender role i di i fender role.


Posted via Tsikot Mobile App

[[archie]]

You said kasi walang risk ng kalawang sa fender roll. Wala, gusto ko subukan if stand by your word and give me 5 year warranty.

As I've said within manufacturer specs ok lang.