divisoria 3M matting

[atog]

mga sir may naka try naba sa inyo neto galing devisoria ok din ba o sayang lang pero..700+ per yard..thanks.

[ninjababez]

ok ba yun "3m type" na benta sa banawe? 2.2k lang sa vios, and cut to fit sya. yun isang boss dito sa office yun ang gamit kaso di lagi nagdadala ng auto kaya di ko ma check out kung ok talaga. baka may idea kayo, thanks!

[yobma]

ok ba yun "3m type" na benta sa banawe? 2.2k lang sa vios, and cut to fit sya. yun isang boss dito sa office yun ang gamit kaso di lagi nagdadala ng auto kaya di ko ma check out kung ok talaga. baka may idea kayo, thanks!

Got my 3M type (coil type) matting from a shop from banawe ok naman siya. There's two variant available, the thin one and the thicker one. Got the thicker one and am happy about it.

[ninjababez]

Got my 3M type (coil type) matting from a shop from banawe ok naman siya. There's two variant available, the thin one and the thicker one. Got the thicker one and am happy about it.

ganito klase ba bro yun material nung mat?
ok na ba yung price nya?
[IMG] http://cdn01.*******/20140801014127-8...d7d7654de3.jpg [/IMG]

[yobma]

ganito klase ba bro yun material nung mat?
ok na ba yung price nya?
[IMG] http://cdn01.*******/20140801014127-8...d7d7654de3.jpg [/IMG]

looks similar though can't really tell based on the picture bro. But what i got was cut to fit (sold per meter) and had no thingy on the middle like what you showed on the photo.

[ninjababez]

looks similar though can't really tell based on the picture bro. But what i got was cut to fit (sold per meter) and had no thingy on the middle like what you showed on the photo.

ah oki kasi nun na mention mo na coil type akala ko ibang material hehehe
thanks bro, mukhang ito na siguro ang kunin ko para cut to fit

[_Cathy_]

ok ba yun "3m type" na benta sa banawe? 2.2k lang sa vios, and cut to fit sya. yun isang boss dito sa office yun ang gamit kaso di lagi nagdadala ng auto kaya di ko ma check out kung ok talaga. baka may idea kayo, thanks!

Mas maganda yung sa Banawe than Divisoria. I got the same for my Altis and it's custom fitted nga. Mine cost only P1200!

[ninjababez]

Mas maganda yung sa Banawe than Divisoria. I got the same for my Altis and it's custom fitted nga. Mine cost only P1200!

yung 1.2k ba kasama na pati passenger side and sa likod?

[_Cathy_]

yung 1.2k ba kasama na pati passenger side and sa likod?

Yes it's included.

[ninjababez]

Yes it's included.

thanks cathy. lastly, "standard" price ba nila yan?

[Starex_Gold]

Yes it's included.

Saan shop yan Maam?

Sent from my LT26i using Tapatalk 2

[12vdc]

Just bought some at 999mall for P400/yd. 1inch daw eto which i doubt(cguro kung folded).


Ginto ang presyo ng nomad sa ace, tatapakan lang at madudumihan so i settled for cheapo.

[dr. d]

i've tried them both..
the branded one is really superior..
the cheap one is really... cheap.. it felt lousy when stepped on... and it started disintegrating early...
my next purchase will be the original one, even if it costs an arm and a leg..

[ninjababez]

i've tried them both..
the branded one is really superior..
the cheap one is really... cheap.. it felt lousy when stepped on... and it started disintegrating early...
my next purchase will be the original one, even if it costs an arm and a leg..

bro gano katagal bago sya nag disintegrate?
planning to use it for a year or two the most, then kung ok yun "technology" ng texture nya tsaka siguro ako mag nomad

[ninjababez]

Just bought some at 999mall for P400/yd. 1inch daw eto which i doubt(cguro kung folded).


Ginto ang presyo ng nomad sa ace, tatapakan lang at madudumihan so i settled for cheapo.

yun 2nd pic bro, yan yung inaalok sa akin sa ace kanina when i inquired kasi mg daw susukat nila sa auto, then cut to fit tapos tsaka ko bayaran kung ilan ma consume.

yung 1st image mukhang 1k + lang magagastos kasama na "trunk" ng swift, mura nga. btw kailangan pa ba tawaran yan or standard na yung price nya at 400/yd?

[12vdc]

The banawe ones are good dahil vinuvulcanize nila ang edges after trimming, but still... pricey for me kung tatapakan lang.. Hehe

Id just get another cheapo kapag nasira. Madalas mapanot dyan is sa driver near the pedals esp on m/t.

[ninjababez]

The banawe ones are good dahil vinuvulcanize nila ang edges after trimming, but still... pricey for me kung tatapakan lang.. Hehe

Id just get another cheapo kapag nasira. Madalas mapanot dyan is sa driver near the pedals esp on m/t.

pwede rin siguro bro, driver side nomad, then the rest banawe or divisoria na?

[12vdc]

pwede rin siguro bro, driver side nomad, then the rest banawe or divisoria na?

Pwede, depending on your budget. I only checked 1 shop didn't go farther, orig price was P450. I bet there's cheaper ones somewhere, siguro those who sells by bulk-sa american vinyl? Swift, baka 2.5yds. The spin 4rows inc baggage consumed 4yds, while pickup 3 yds malapad kasi. I used aviation snips to cut it, di kaya ng kitchen scissors ko.

[ninjababez]

Pwede, depending on your budget. I only checked 1 shop didn't go farther, orig price was P450. I bet there's cheaper ones somewhere, siguro those who sells by bulk-sa american vinyl? Swift, baka 2.5yds. The spin 4rows inc baggage consumed 4yds, while pickup 3 yds malapad kasi. I used aviation snips to cut it, di kaya ng kitchen scissors ko.

sige check out ko muna sa boss ko before i decide

[_Cathy_]

Yup. It's my second set na. Buo pa yung for my 2010 Altis. I only had to replace the driver's side in 2013.