Hyundai 1997 Coupe/tiburon C.A.I

[mariomundo]

Hi does anyone know where I can buy these? Anyone here have this setup (cold air intake) is it worthit?

I found one in speed lab, it costs 10k, are there any cheaper than this? Thank you guys!

1997 hyundai coupe 2.0L

[niky]

If you can find a made-for-Mitsubishi Simota kit that will fit, you're in luck... otherwise you have to fabricate, and you're probably going to spend about that much for something approaching the level of finish of Speedlab's kit.

[mariomundo]

so it's better off buying the speed labs kit? less effort the question is, is it worth it? what are the gains?

[niky]

so it's better off buying the speed labs kit? less effort the question is, is it worth it? what are the gains?

5-8 hp, usually, on smaller engines... you might see bigger gains on the 2.0 in the Tiburon.

[mariomundo]

thanks for this sir! i want to hear my 2.0 tiburon growl like a wild animal hehe

[niky]

Or shriek like a banshee? Hehehe... oops... that takes a full exhaust... Yeah... an intake will give it some more growl... but the important thing is the power.

Better find out, also, how much it will cost to upgrade this with the bypass valve. A bypass valve is a must to protect your engine from water ingestion.

[PrudzELANTRA]

Sir mariomundo, are you still in search for a CAI for your tib? True, because its hard to look for aftermarket parts for hyundai's especially on the performance mods/phase.. Basically, on the past, this has been my nightmare searchin' for CAI that would fit for Elantras (Actually Elantra and Tiburons are of the same engine configuration , but thus have a difference in displacement.)

Anyways, to solve my problem, I do custom CAI's especially on vehicles forgotten by the aftermarket companies...Currently, I made a custom HYbrid- CAI which has an alternate intake tract whenever a puddle, heavy rain is sensed which could save your engine against hydro-lock due to water ingestion from unwanted certainties..

I can design a custom CAI according to what lay out you wish to have, whether the conventional way or the hybrid (With "anti-baha" gadget) but still isolate intaked air away from engine heat. And of course benefit the low-mid kick and deep engine growl.

PM or text me for details if your are interested, aside from CAIs I also favricate parts for hyundais...09228808213 - PrudZ

[PrudzELANTRA]

Sir mariomundo, are you still in search for a CAI for your tib? True, because its hard to look for aftermarket parts for hyundai's especially on the performance mods/phase.. Basically, on the past, this has been my nightmare searchin' for CAI that would fit for Elantras (Actually Elantra and Tiburons are of the same engine configuration , but thus have a difference in displacement.)

Anyways, to solve my problem, I do custom CAI's especially on vehicles forgotten by the aftermarket companies...Currently, I made a custom HYbrid- CAI which has an alternate intake tract whenever a puddle, heavy rain is sensed which could save your engine against hydro-lock due to water ingestion from unwanted certainties..

I can design a custom CAI according to what lay out you wish to have, whether the conventional way or the hybrid (With "anti-baha" gadget) but still isolate intaked air away from engine heat. And of course benefit the low-mid kick and deep engine growl.

PM or text me for details if your are interested, aside from CAIs I also favricate parts for hyundais...09228808213 - PrudZ