New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Hybrid View

  1. Join Date
    May 2012
    Posts
    87
    #1
    Magandang umaga mga sirs.. Patulong naman regarding sa PCV Valve ng esi namin.. We haven't changed or replace the part ever since na bili yung sasakyan noong 1995, meron bang mabibili na PCV valve at magkano? Thanks in advance..

  2. Join Date
    May 2005
    Posts
    56
    #2
    any auto supply should have that.
    kung gusto mo, tanggalin mo then show the part sa shop

    ingat lang, minsan nagiging britlle yung PCV na yan, na pag tinanggal mo eh pwedeng mabasag/madurog at may maiwan na small parts sa loob ng pinagtanggalan mo.

    cost? around 100++ pesos

  3. Join Date
    May 2012
    Posts
    87
    #3
    Quote Originally Posted by celd15b View Post
    any auto supply should have that.
    kung gusto mo, tanggalin mo then show the part sa shop

    ingat lang, minsan nagiging britlle yung PCV na yan, na pag tinanggal mo eh pwedeng mabasag/madurog at may maiwan na small parts sa loob ng pinagtanggalan mo.

    cost? around 100++ pesos
    Thank you sir.. Try kong palitan tomorrow..

  4. Join Date
    Nov 2017
    Posts
    1
    #4
    Quote Originally Posted by celd15b View Post
    any auto supply should have that.
    kung gusto mo, tanggalin mo then show the part sa shop

    ingat lang, minsan nagiging britlle yung PCV na yan, na pag tinanggal mo eh pwedeng mabasag/madurog at may maiwan na small parts sa loob ng pinagtanggalan mo.

    cost? around 100++ pesos
    sir me katanungan po ako,,,san makikia ang pcv ng innova? Wala po sa DIY ng YT,,di ko rin mahanap sa me xhaust manifold banda or sa me bandang camshaft... kasi po umaakyat sa dip stick ang oil, pag umaandar ...salamat pong marami,,

  5. Join Date
    Jul 2012
    Posts
    329
    #5
    sir i have honda jazz 2005 1.5vtec matic engine. car roughly idles lalo na kapag on aircon. rpm sometimes drops beyond normal which causes the engine to jerk or even stall. sparks already replaced, TB with IACV already cleaned, replaced one suspected ignition coil damage but still same issue. nabasa ko a faulty PCV can also be the cause. I checked the spot kung san located PCV Valve ang daming carbon buildup. planning to replace it DIY lang. what you think mga sir?

  6. Join Date
    Feb 2009
    Posts
    5,157
    #6
    Quote Originally Posted by nashimoto View Post
    sir i have honda jazz 2005 1.5vtec matic engine. car roughly idles lalo na kapag on aircon. rpm sometimes drops beyond normal which causes the engine to jerk or even stall. sparks already replaced, TB with IACV already cleaned, replaced one suspected ignition coil damage but still same issue. nabasa ko a faulty PCV can also be the cause. I checked the spot kung san located PCV Valve ang daming carbon buildup. planning to replace it DIY lang. what you think mga sir?




    do a scan of diagnostic trouble codes first. then, check engine PIDs (engine operating parameter data). then check the ignition firing voltage. avoid guesswork and anecdote hearsay "diagnosis"

  7. Join Date
    Jun 2008
    Posts
    70
    #7
    Quote Originally Posted by nashimoto View Post
    sir i have honda jazz 2005 1.5vtec matic engine. car roughly idles lalo na kapag on aircon. rpm sometimes drops
    beyond normal which causes the engine to jerk or even stall. sparks already replaced, TB with IACV already cleaned, replaced one suspected ignition coil damage but still same issue. nabasa ko a faulty PCV can also be the cause. I checked the spot kung san located PCV Valve ang daming carbon buildup. planning to replace it DIY lang. what you think mga sir?
    Air Flow Sensor needs cleaning. Spray mo ng contact cleaner.

  8. Join Date
    Aug 2015
    Posts
    109
    #8
    mga sir magpapalit din ako ng pcv valve, okay din ba ang quality kung sa mga auto supply ako bibili? tama po ba na may kasamang o ring at hose ang pcv valve? tia

  9. Join Date
    Sep 2012
    Posts
    2,809
    #9
    Quote Originally Posted by luffin View Post
    mga sir magpapalit din ako ng pcv valve, okay din ba ang quality kung sa mga auto supply ako bibili? tama po ba na may kasamang o ring at hose ang pcv valve? tia
    Hit or miss... naka 3 palit ako dati para sa Mazda different brands hindi tumagal... in the end binalik ko yung original

    Sent from my Asus ZenFone 2 using Tapatalk

  10. Join Date
    Feb 2003
    Posts
    1,038
    #10
    Your car symptoims is very similar to my 2nd gen CRV diagnose fault code is TPS error. Replaced it and now back to normal again.

Page 1 of 2 12 LastLast

Tags for this Thread

Patulong naman.. PCV valve