jack stands

[badkuk]

mga magkano kaya to? ung mga 2-ton stands should be ok for a sedan, right?

saw one on sale for 495 sa DIY virramall....or meron kayang 2nd hand nito?

lastly...do i really need 4 jack stands?

[OTEP]

Usually you need to use one jackstand per wheel you take off. If you took off four wheels then you would need four jackstands.

However, substituting more jackstands per wheel removed is safer provided you know where to place them.

[wildthing]

Dito sa angeles/dau i got a pair at P600. It is like this (black jack stand) but mine is orange-red color



if the picture don't show go to this site:

http://www.pbase.com/image/27395460

[fierari]

bili ka na lang ng bakal pa welding mo para mura. di nga lang adjustable........

[benchph1]

sulit lang to pag may talyer ka o kaya DIY guy ka na mahilig magbuting-ting ng auto mo...pero kung bibilhin mo to "just in case" lang. hindi mo rin siya halos magagamit.

[sturbo]

kaya ba ng 2 ton jack stand kung sa pajero ko gagamitin?
tnx.

[pajerokid]

Kalimutan ko load rating nung jackstand ko. kulay blue and yellow. got it in megamall nung transhow. P600. Umuubra naman.

[Ungas]

Originally posted by sturbo
kaya ba ng 2 ton jack stand kung sa pajero ko gagamitin?
tnx.

Kaya naman po ng 2 tonner, not unless your Pajero weighs more than Isuzu Elf trucks. :D

[OTEP]

Yup kaya ng jackstands ang Pajero. Hindi naman yung buong two sasakyan ang nakasakay sa kanya. Nandun pa naman ang ibang gulong/jackstands to share the load.

Unless you managed to balance a tire-less Pajero on a single jackstand.

[wildthing]

Kung Pajero or SUV or pick-up you'll need the taller jack stand....stock ko na frontier e nakasagad ang settings pag-ginamit ko yung normal na maliit na jackstand....meron itong version na twice the height....around P800/pair yata if not P1,000....3tons load capacity yata ito.

I'd say sulit siya kung mahilig kang magbuting-ting ng sarili mong sasakyan.

[gearspeed]

Magandang bilhin na jack yung ginagamit ng mga mekaniko.Alam ko merong maliit yun at least hindi siya tulad nung jack na iniikot mo ang pagadjust habang tumataas yung sasakyan mo...

:D

[Ungas]

You are pertaining to hydraulic jacks, there are bottle types and crocodile models. Oil is pumped in to raise the vehicle. The other and more common to later model vehicles are mechanical jacks which needs a lot of effort to twist and raise.

Jack stands are in different manner, it is primarily used to hold the height lifted by mechanical or hydraulic jacks.

[MAXBUWAYA]

jack stand is much safer kung nakataas ang kotse for a long period of time, like changing oil, baha, etc.

i saw sa makro sale 299 isa pag dalawa binili mo. gawa ng mga tsino

[wrecker]

i think i saw KYK jackstands sa puregold for about 600/pair. check ko nga ulit

[NightRock]

Mas Ok kung pagawa ka nalang ng tailor made jack stand... Like Old StudBolt... then pa lagyan mo ng frame... matibay talaga.. medyo mahirap lang talga adjust you need a wrench bago mo ma adjust kung may load... or better pa welding mo ng handle.. sa nut para ma adjust ng madali

[ian_rex]

jack stands for Php 495? grab it, quick! like all others, ok yan. hindi ko na uulitin yung mga positive points na sinabi nila tungkol sa jack stand. i own a pair, kaya nya ang 2 tons, kasi i use it often sa dmax namin. anyway, isa pang gamit nito halimbawa gusto mong ipahinga muna ang ride mo, for storage, gamit ka ng 2 pairs (4 pcs) na para naka-angat yung mga tires. mura yang 495 na yan. i got mine at around 900 per pair.

[dannybe]

where can i get descent adjustable 2 ton floor jacks? The ones i see in true value are 3 tons and cost around P3,800 a pair!!

point me in the right direction guys.

thanks.