Results 1 to 10 of 11
-
December 25th, 2016 08:52 AM #1
Team, any idea on why and how to fix the "Pre-Collision Assist Not Available"? Everest 2016
-
December 25th, 2016 10:31 AM #2
have you checked the settings of the driver assist? that will be the left hand remote on the steering wheel. andun ang settings ng precollision baka na-off mo.
Last edited by yebo; December 25th, 2016 at 10:39 AM.
-
December 25th, 2016 09:38 PM #3
Yes sir, i did check. Naka grayed out siya. Can't enable it.
Sent from my SM-G935F using Tsikot Forums mobile app
-
Verified Tsikot Member
- Join Date
- May 2011
- Posts
- 385
December 25th, 2016 10:51 PM #4Anong variant po eve nyo?
Sent from my SM-G925F using Tsikot Forums mobile app
-
Verified Tsikot Member
- Join Date
- Aug 2014
- Posts
- 28
-
Verified Tsikot Member
- Join Date
- Aug 2014
- Posts
- 28
July 22nd, 2017 10:24 AM #6
-
Verified Tsikot Member
- Join Date
- Jul 2016
- Posts
- 939
July 22nd, 2017 08:51 PM #7
-
July 22nd, 2017 09:44 PM #8
happened to my eve twice. wala lang, off ko lang engine then start again ok naman na siya ulit.
o
-
Verified Tsikot Member
- Join Date
- Aug 2014
- Posts
- 28
July 24th, 2017 11:47 AM #9
-
August 6th, 2017 11:29 AM #10
Sorry for the late reply as i was offline. They replaced the front sensor lane assist. Took off the bumper and replace the whole module. Took awhile to align the sensors as they had to drive it for a long period without stopping. ~30 minutes
Sent from my iPhone using Tapatalk
in manila, water boils at 100 degrees centigrade. in baguio, water boils at 95 degrees centigrade.
Overheating and mitigation methods