IAT SENSOR FORD LYNX 1.6 2000 Model

[wmc_16]

Mga bro may nakapagpalit na ba sa inyo ng IAT (Intake Air Temperature) sensor? (Saan ba murang mabibili ito at saan maraming spare parts ng Ford Lynx?) Ano ba nangyayari kapag sira ito? Kasi yung engine ko ay taas baba ang idling, eh dami ko ng pinalitan at pinagawa like changed spark plug, changed camshaft sensor, changed MAF (Mass Air Flow) sensor, and cleaned the throttle but still the engine idling is fluctuating especially when i put the the gear to drive. Dami ko ng nagastos eh baka may alam kayo na marunong na mekaniko sa ganitong problem para masolve ko na ito (wala na kasi akong tiwala sa CASA eh puro palit na lang wala namang nasosolve). Please help mga bro at thanks in advance. Butas na bulsa ko!

Asi boy

[hntk_03272000]

kala ako lang my prob ng ng taas baba ng idling ako din ganun din, meron ako nabili nung 2005 pa na 03 lynx ghia pareho ng prob mo dinala ko ng paulit ulit sa ford libis dhil sa taas baba ng idling pinalitan ng spark plug,fuel filter,air cleaner pati change oil dinamay tapos nung binalik ko uli sabi mga sensor n daw gulat ako nun!dinala ko sa casa ang concern ko ay ung taas baba na idilng di nila nagawa KAASAR! sakit sa bulsa talaga bro!

pero since dnala ko un kotse na di nagawa ang idling 2mipid nmn sa gas infairness! kc pumunta kmi ng subic true sctex fr marikina full tank kami pagbalik namin ng marikina almost 3/4 pa gas ko not bad naman but di ko alam kung ilang klm/ltr

since nabili ko un lnyx ko ganun na un idling but tnx GOD wla nmn naging prob un lang sa takbo ok naman,sana my mag advce sa min if ano gawin sa idling THANKS!

[hntk_03272000]

wmc_16

bakit kelangan palitan ung iat?para san ba un?

[smirky20]

Mga bro may nakapagpalit na ba sa inyo ng IAT (Intake Air Temperature) sensor? (Saan ba murang mabibili ito at saan maraming spare parts ng Ford Lynx?) Ano ba nangyayari kapag sira ito? Kasi yung engine ko ay taas baba ang idling, eh dami ko ng pinalitan at pinagawa like changed spark plug, changed camshaft sensor, changed MAF (Mass Air Flow) sensor, and cleaned the throttle but still the engine idling is fluctuating especially when i put the the gear to drive. Dami ko ng nagastos eh baka may alam kayo na marunong na mekaniko sa ganitong problem para masolve ko na ito (wala na kasi akong tiwala sa CASA eh puro palit na lang wala namang nasosolve). Please help mga bro at thanks in advance. Butas na bulsa ko!

Asi boy

i think wala sa IAT sensor ang prob mo. check mo yung fuel pressure ng fuel pump, compression test mo rin every cylinder, kung yung MIL or check engine light ay d naka on most probably nandon yung sira. if my check engine sya i think ang sira nyan ay yung TPS ( throttle position sensor ).

[smirky20]

Mga bro may nakapagpalit na ba sa inyo ng IAT (Intake Air Temperature) sensor? (Saan ba murang mabibili ito at saan maraming spare parts ng Ford Lynx?) Ano ba nangyayari kapag sira ito? Kasi yung engine ko ay taas baba ang idling, eh dami ko ng pinalitan at pinagawa like changed spark plug, changed camshaft sensor, changed MAF (Mass Air Flow) sensor, and cleaned the throttle but still the engine idling is fluctuating especially when i put the the gear to drive. Dami ko ng nagastos eh baka may alam kayo na marunong na mekaniko sa ganitong problem para masolve ko na ito (wala na kasi akong tiwala sa CASA eh puro palit na lang wala namang nasosolve). Please help mga bro at thanks in advance. Butas na bulsa ko!

Asi boy

i think wala sa IAT sensor ang prob mo. check mo yung fuel pressure ng fuel pump, compression test mo rin every cylinder, kung yung MIL or check engine light ay d naka on most probably nandon yung sira. if my check engine sya i think ang sira nyan ay yung TPS ( throttle position sensor ).

[smirky20]

FYI

IAT (INTAKE AIR TEMPERATURE)
is a thermistor which changes resistance in proportion to temperature changes. IAT sensor inputs air temperature to the powertrain control module (PCM). PCM uses IAT information as a correction factor in calculation of fuel, spark and MAF.

TPS (Throttle Position Sensor)
is a rotary potentiometer sensor that provides a signal to the PCM that is linearly proportional to throttle plate/shaft position. The TP sensorsignal affects air/fuel ratio,injector timing, iddle speed, EGR flow and ignition timing. On some applications, TP sensor input is used in determining transmission electronic pressure control, shift and torque converter clutch scheduling. The TP sensor is mounted on throttle body.

CMP (Camshaft Position Sensor)
is used to determine camshaft position and to identify when piston no.1 is at Top Dead Center (TDC) of compression stroke. CMP sensor signal is used by the PCM for synchronizing firing of sequential fuel injectors. Application wih Coil On Plug (COP) ignition also use CMP signal to select the proper ignition coil to fire.

CKP (Crankshaft Position Sensor)
is a magnetic transducer mounted on engine block, next to crankshaft pulse wheel. indicates crankshaft position and speed information to PCM.

[achilles102270]

need help,.pano ba proper timing ng cam shaft double twin cam.lagi kasi nababasa un spark plug tska ibabaw ng piston ng langis,.i do nessesary things like changing valve seal valve guide and piston ring.pro meron pa rin xa langis kaya namamalya un sasakyan intake and exhaust manifold basa ng langis.bago lng xa overhaul..engine ko is ford lynx 1.6 model 2001.kindly help.tnx

[COMCAM]

Mga bro may nakapagpalit na ba sa inyo ng IAT (Intake Air Temperature) sensor? (Saan ba murang mabibili ito at saan maraming spare parts ng Ford Lynx?) Ano ba nangyayari kapag sira ito? Kasi yung engine ko ay taas baba ang idling, eh dami ko ng pinalitan at pinagawa like changed spark plug, changed camshaft sensor, changed MAF (Mass Air Flow) sensor, and cleaned the throttle but still the engine idling is fluctuating especially when i put the the gear to drive. Dami ko ng nagastos eh baka may alam kayo na marunong na mekaniko sa ganitong problem para masolve ko na ito (wala na kasi akong tiwala sa CASA eh puro palit na lang wala namang nasosolve). Please help mga bro at thanks in advance. Butas na bulsa ko!

Asi boy

Check your hoses ( air cleaner hose, yung mga maliliit na hoses ) kasi when I changed them, nawala yung taas-baba ng idling ko.