Anybody here from Angeles pampanga knows a shop who do CO2 testing for the right Air/Fuel mixture ratio in a car? This CO2 tester will tell you if you are running lean or rich in fuel. Thank you.
Anybody here from Angeles pampanga knows a shop who do CO2 testing for the right Air/Fuel mixture ratio in a car? This CO2 tester will tell you if you are running lean or rich in fuel. Thank you.
The problem with engine tuning with an exhaust gas analyzer is that it might not have a quick enough sampling rate to allow you to do fine tuning.
You need an AF-Meter with a wideband O2 sensor... not a CO2 sensor... to tune your air-fuel ratios.
Ang pagbalik ng comeback...
Forget the emissions center, take your car to a performance shop with a wideband. Most emissions centers only have readouts for HC, CO and particulate emissions. While you might be able to tell if the car is running incredibly rich from the HC readings, you won't have the tuneability you'll get with an O2 sensor.
Yes, a modern five-gas analyzer will do O2 also... but local emissions centers are only required to measure HC and CO. Nobody does NOx or O2 testing at the smoke places.
Ang pagbalik ng comeback...
Just curious sir, doesn't the ECU self-adjust the air-fuel ratio depending on the readings from the onboard sensors? TIA.
Depends. If it's an OBDII car with oxygen sensors, yes. Some OBDI cars, too. But some 90's cars with OBDI that came here had the O2 sensors disconnected or simply not put in.
Ang pagbalik ng comeback...
*niky - thanks for the reply sir, one more thing... Would using e10 (which I read is a gas oxygenator) increase the oxygen in the exhaust and "fool" the oxygen sensor into thinking that the engine was running lean and cause the ecu to make the A-F ratio richer?