Car alarm to central locks wiring. help

[kokiksmen1]

gud day...

anyone knows how to wire my alarm to central locks..


central locks


alarm

ok na yong unlock button ko, na connect ko na..yong lock na lng kulang kung

saan ko pwedeng e connect sa wire ng alarm.

thanks ang happy new year to all

[indiej]

You're probably very close. They're usually together in a connector. How did you look for your wires? On the main door lock, the footwell or direct to the ecu? Using what tools?

[Chinoi]

Swerte mo. The other day ko lang natutunan details ng central door lock wiring ng kotse. Madalas kasi ako masiraan ng actuator ( laging bungi ang mga gears ).

Lock and unlock switch kinabitan ng Brown at White. Kung ayaw mo gumamit ng 2 push button switch. Pwede rin 1 push button switch gamitin.

Connect mo Brown at White wire sa 2 terminal ng 1 pc.Push Button Switch. Every time mag push ka ng button ay mag toggle ang locking at unlocking ng door lock actuator.

Ano pala brand ng Door Lock Actuator mo? Sana hindi HT-610. Baka masunugan ka ng wire ng kotse.

Meron na ko na-post about HT-610 door lock controller dito sa tsikot.
http://tsikot.com/forums/car-securit...0/#post2068261

[rol_z9]

gud day...

anyone knows how to wire my alarm to central locks..


central locks


alarm

ok na yong unlock button ko, na connect ko na..yong lock na lng kulang kung

saan ko pwedeng e connect sa wire ng alarm.

thanks ang happy new year to all

bro, maaring late na to, heres how.
kailangan mo check muna kung alin sa COM2/NO2 at COM1/NO1 ang lock o unlock ng alarm.
pag na determine muna ito, ikabit mo ito sa switch ng central door lock.

maaring ganito ang connection depende sa resulta ng test mo sa alarm.
Combination 1
COM1 - GROUND and COM2 - GROUND
NO1 - BROWN and NO2 - WHITE

Combination 2
COM1 - GROUND and COM2 - GROUND
NO1 - WHITE and NO2 - BROWN