hello mga tsikoteers!
hope someone will help me sa problem ko.
my ride is Mitsu L200 pickup. before starting the engine, you should wait for the heater light to turn green from red. at the same time nakailaw rin yung batt at thermostat yata un. now pag nagstart nako ng engine, after mag green un heater light, all lights/indicators with turn off. this is the normal setup/scenario.
ngayon, pag nagstart nako ng engine, mamamatay uli mga indicators but after some time iilaw ilaw uli yun heater with red light or minsan green while the engine is running with matching "clicking sound" pa. nakakapagtaka kasi di naman ganito dati. nakakainterfere din un paglight nito sa radio. it sounds something like a feedback, rinig sa speakers every time umiilaw un indicator.
reving up the engine will turn off the indicator sometimes, pero di lagi.wala naman ako binabago sa electrical settings before ito nangyari, as in biglaan lang nagkaganito. battery seems ok kasi 1-click naman magstart ng engine.
another thing, baka related dito, pag sa gabi mahina ang busina ko pag turned on ang headlights. chaka pala, pag bumubusina ako nawawala sound sa radio.
really need your inputs guys. salamat po.
The Largest Car Forum in the Philippines
- Forums
- Discussions
- Events
- Community
Results 1 to 4 of 4
Hybrid View
-
Ride or Die
- Join Date
- Apr 2006
- Posts
- 681
May 2nd, 2007 04:22 PM #1
-
Le Bombardier
- Join Date
- Jun 2006
- Posts
- 6,104
-
UST ENT-HNS
- Join Date
- Oct 2002
- Posts
- 22,658
May 5th, 2007 09:49 PM #3It may mean one of your glow plugs is busted or grounded. Happens a lot to me on the MB100. But since the thing still starts within a reasonable amount of time, I just ignore it.
On a 4d56, it could also mean a faulty glowplug relay (the big black box attached to one of the battery posts).
http://docotep.multiply.com/
Need an Ambulance? We sell Zic Brand Oils and Lubricants. Please PM me.
-
Tsikoteer
- Join Date
- Feb 2012
- Posts
- 605
August 10th, 2015 06:39 PM #4Mga sir bakit po kaya ayaw mag green ung indicator ng heater lagi lang naka kulay red nag start naman po makina kaso mag hintay pa ko mga 10secs bago ko I start
Originally Posted by OTEP
It may mean one of your glow plugs is busted or grounded. Happens a lot to me on the MB100. But since the thing still starts within a reasonable amount of time, I just ignore it.
On a 4d56, it could also mean a faulty glowplug relay (the big black box attached to one of the battery posts).
Anu po kaya sira?Last edited by sotel; August 10th, 2015 at 07:29 PM.
Reply With Quote
Originally Posted by OTEP
