New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Results 1 to 14 of 14

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. Join Date
    Mar 2003
    Posts
    571
    #1
    mga sir, just replaced my 02 civic headlight, aside from bringin' it back to casa paano ba pag-aim nito para yun' gusto kong adjustment masunod.
    pagkakuha ko kasi sa kanila masyado naka-aim high, ng binalik ko para ibaba sobra naman baba ng adjustment nila. kakainis na pabalik-balik. thanks!

  2. Join Date
    Oct 2002
    Posts
    10,942
    #2
    Check out this link:

    http://www.autooptiks.com/aiming.html

    HTH

  3. Join Date
    Oct 2002
    Posts
    1,977
    #3
    i duno po if tama but... tinatapat ko car ko po sa wall then tsaka ko inaadjust.. para po makita ko kung tama lang po yung height..

  4. Join Date
    Mar 2003
    Posts
    571
    #4
    thanks sir ungas, ok yun website.
    problema ko na lang ngayon kung ano pipihitin ko sa headlight ko para mag-taas baba.

  5. Join Date
    Oct 2002
    Posts
    22,658
    #5
    May aiming screws siya on the headlight housing.

    http://docotep.multiply.com/
    Need an Ambulance? We sell Zic Brand Oils and Lubricants. Please PM me.

  6. Join Date
    Oct 2002
    Posts
    5,235
    #6
    hehe medyo nalito na ko dun sa middle part.

  7. Join Date
    Feb 2003
    Posts
    690
    #7
    di ko kabisado ang es e, pero sa ek may dalawang parang tansan sa likod ng headlight housing. 1 is for horizontal adjustment and 1 is for vertical. hth

  8. Join Date
    Feb 2003
    Posts
    690
    #8
    di ko kabisado ang es e, pero sa ek may dalawang parang tansan sa likod ng headlight housing. 1 is for horizontal adjustment and 1 is for vertical. hth

  9. Join Date
    Mar 2003
    Posts
    571
    #9
    thanks wrecker, otep 'will try to find those aiming screws.

  10. Join Date
    Jan 1970
    Posts
    6
    #10
    wrecker would you know the aiming screws for toyota ride....

  11. Join Date
    Feb 2003
    Posts
    690
    #11
    Originally posted by nat_sci
    wrecker would you know the aiming screws for toyota ride....
    nat_sci sorry la akong gaanong alam sa mga toyota e.

  12. Join Date
    Mar 2003
    Posts
    571
    #12
    Originally posted by wrecker
    di ko kabisado ang es e, pero sa ek may dalawang parang tansan sa likod ng headlight housing. 1 is for horizontal adjustment and 1 is for vertical. hth


    correct ka dun wrecker may 2 parang tansan nga sa likod and ok na ngayon headlights ko.

  13. Join Date
    Oct 2003
    Posts
    2,973
    #13
    guys paano ba linisin yung mga tailights? kasi parang ang dumi na sa loob, kasi di na ganun ka-bright kunwari nake-turning signal ako...

  14. Join Date
    Feb 2003
    Posts
    690
    #14
    Originally posted by zechs
    guys paano ba linisin yung mga tailights? kasi parang ang dumi na sa loob, kasi di na ganun ka-bright kunwari nake-turning signal ako...
    medyo matrabaho to kahit ano ang ride mo. baklasin mo kung kaya. then just use a stick with cotton dipped in water and soap. dun mo idaan sa kabitan ng sockets. then repeat using water only. let it dry thoroughly before plugging in the sockets again.

    pero medyo hassle since i know that shops cleans headlights for as low as 800. mas mura pa yata sa banawe boys.

    pag madaling mag dumi or mag fog baka may leak na yan.
    Last edited by wrecker; November 19th, 2003 at 01:11 PM.

aiming d headlight