home speakers pede b sa kotse?

[sherwinlou]

ask ko lang kung pede yung home speakers sa kotse may gumawa naba nito?
tia

[userfriendly]

Not 100% sure but i think it can work. Your amp, if you have one will but at half the power output. So even if it works, its not ideal.

Home speakers are typically 8 ohms while car speakers and amps are normally 4 ohms. So your amp will see an 8 ohm load and power output will be halved.

[russpogi]

I remember a friend of mine back then in High School: The year was 1995 and the ride is a 1981 Toyota Corolla DX. My friend wanted his sounds to go "boom-boom" so he took the speakers from their home stereo system (yung malalaking "old school" type) and placed it in his trunk, used an el-cheapo amplifier and alas! May "boom-boom" na sya! hahaha!

But seriously, he took them off after about two months when he was able to save enough cash to buy a Targa Sub.

Share ko lang...

[nicolodeon]

Basta pareho impedance i.e. ohms requirments ng HU mo at yung stereo mo sa bahay, pwede. Ginawa ko na yan - tagal na: owner type jeep at yung dati kong Lancer box-type.

[basti08]

same as russpogi's, i have a friend with her toy car named 'freaky' an 81 Mirage. was sold to her for only 10k. she just traded a celfone for it. tas bara bara nalang ginamit. no rear brakes (it screeches when braking), home speakers literally (actually works), matress for rearseats... hehehe i miss that car.

[zero]

pwede yan.
yung sounds ko sa garahe namin, my old alpine HU + 2 set of speakers from my old sony mini-component.

nung college days ko, baliktad naman, sanyo radio cassette unit + 2 pioneer 6.5" speakers naman ang gamit ko sa ford escort ko.

[sherwinlou]

ok try ko tom at least may feedback,kakabit ko kc bose speaker n 8" ppalitan ko kc yung sa stock para medyo ok nmn ang sound ng lancer ko.tnx. update ko kayo kung ano mangyayare hehehe

[pitboll01]

pude yan kasi dati yung friend ko may nissan sentra cra yung isang speaker kaya kinuha nya yung speaker sa radio nila tapos kinabit sa dalawang wire. gumagamit nalang siya ng adaptor na tape na may wire (d ko alam kung ano tawag dun bsta tape na may wire) papunta sa Mp3 player niya
May boom boom na siya

[v6dreamer]

ask ko lang kung pede yung home speakers sa kotse may gumawa naba nito?
tia

There's no harm in using 8 ohm speakers in a car.

[StraightSix]

I know someone who solved that problem with impedance mismatching.

When he fitted 8[SIZE=4][SIZE=2]Ω speakers in his car, he also installed his mini-compo stereo under the dashboard. And f[/SIZE][/SIZE][SIZE=4][SIZE=2]or more boom-boom, he used his desktop pc's active sub. [/SIZE][/SIZE]


[SIZE=4][SIZE=2]Buti na lang hindi sinama yung turntable.[/SIZE][/SIZE]

[hakkinen]

hi mga sirs, makisuyo lang po...

what can u say about this: i have a spare altec lansing sub kasi sa bahay (1st gen in wood box pa, it is the 2.1 type, kaso lang hndi na gumagana kasi yun 2 monitor cube speakers nya that's why). i'm planning to use this active sub sana to go with my stock set of speakers (99 civic).

can this be possible?

[oliver1013]

Yung kuya ko naalala ko pag may gimik sa greenhills nung uso pa pormahan ng auto dun sa weekend, nilalagay yung akai speakers ng bahay sa likod ng DX corolla hatchback niya

[StraightSix]

Pwede naman ... as long as you're satisfied with the sound and look.

Yun nga lang, you have to feed it at line-level from your head unit. Kung wala there are adaptors that convert speaker-level signals to line-level ... but it kinda defeats the objective re: costs.

You also have to figure out a way to remotely switch the sub, or else you'll have to turn it on/off manually. As for the power source, if that's the same as the ACS45.1 you can just bypass the internal power supply (220vAC-to-12vDC) and hook it straight to 12vDC.

[alwayz_yummy]

4ohms lang dapat ang auto speakers. ang sa home ay kalimitan ay 8ohm ang operating..

just check that parameter. pag di 4 ohm wag mo gamitin sa auto baka madamay pa HU mo..

[hakkinen]

Pwede naman ... as long as you're satisfied with the sound and look.

Yun nga lang, you have to feed it at line-level from your head unit. Kung wala there are adaptors that convert speaker-level signals to line-level ... but it kinda defeats the objective re: costs.

You also have to figure out a way to remotely switch the sub, or else you'll have to turn it on/off manually. As for the power source, if that's the same as the ACS45.1 you can just bypass the internal power supply (220vAC-to-12vDC) and hook it straight to 12vDC.

ah i see.... thanks for the detailed explanation sir. i need to check the ohms output din pla nito.

thanks din TS