Gusto kong matutong sa car painting

[jaypee10]

alam ko pong madami dito sa atin ang mga beterano sa pag pipintura ng tsikot.ako po kasi ay nahihiwagaan sa mga nag pipintura ng kotse,mahilig din kasi akong mag kutingting ,lalo na sa aking sariling sasakyan.sa electrical wiring.sound set up.saka sa mga minor problem ng kotse ko.like palit ng brake pad,shock,valve cover gasket,,etc.

isa lang talaga na hihiwagaan ako.pag dating sa painting,,sanay kasi ako na spray paint lang gamit ko sa gulong ng tsikot ko.ngayon ay hihingi sana ako ng kaunting idea.or step by step procedure sa body painting,para mapag praktisan itong tsikot ko..

ito kasi naiisip ko hindi ko tuloy alam kung tama o mali.sinubukan ko ng mag search sa google ,youtube pero hindi kumpleto kung ano ung mga nakikita ko..

ito sana gagawin ko..
halimbawa,,body painting after na ma repair ung mga bulok sa body,

1, spray ng epoxy primer,
2. masilyahan.at lagyan ng putty para mas makinis
3. spray ng primer ulit,
4. pagka tapos sprayan ng primer.lihahin para medyo kuminis at linisin mabuti .
5. bugahan na ng body color,mga 3 patong.
6. bugahan ng top coat clear.
7. after na matuyo lihahin at i buffing..hanggang sa kuminis siya.

ngayon ito na gumugulo sa aking isipan,,may mga nakikita kasi ako at may mga nagsasabi na.

ung number (5.bugahan na ng body color,mga 3 patong ) sabi nila hinahaluan daw ng clear coat ung pintura,

pagkatapos daw matapos ung body color wag daw muna bugahan agad ng top coat or clear coat,patuyuin daw muna at
pasadahan ng sand paper lihahin daw muna para kuminis ang pintura,bago bugahan ng top coat.hindi kaya lalabo ung pintura nun,?

ano ba ang tamang procedure at sana ay mabigyan ako ng tip.sa tamang pag pipintura.

thanks...

[raul tuason]

tawagan na lang po nyo ako sa 8884342,kasi marami din ako tanong sa iyo tulad ng wash over, panel, spot, metallic, pearl or solid , single/ two or three stage painting ba, mahirap kasi sa akin tulunggan ka dito , hirap ako magsulat, willing ako turuan ka

[jaypee10]

tawagan na lang po nyo ako sa 8884342,kasi marami din ako tanong sa iyo tulad ng wash over, panel, spot, metallic, pearl or solid , single/ two or three stage painting ba, mahirap kasi sa akin tulunggan ka dito , hirap ako magsulat, willing ako turuan ka

gusto ko lang po ung minor painting .ordinary paint lang po para sa aking tsikot..

saka na po siguro ung ibang pasikot sikot..basta mahalaga po mabugahan kopo ng maayos ung tsikot ko..
kasi po pinalatero ko ung sa tapalodo sa likuran ko..minasilyahan kona po.at may primer nadin..ready na siyang bugahan..

[7138]

as much as possible sir, wag ka gagamit ng putty, gamitin mo lang pag meh mga minor retouch lang,
gamit ka lang ng masilya all the way kung maari, ang putty kasi, pag nabilad and naluto sa araw,
may chance na magshrink, and believe me, ampanget.

[red_one]

as much as possible sir, wag ka gagamit ng putty, gamitin mo lang pag meh mga minor retouch lang,
gamit ka lang ng masilya all the way kung maari, ang putty kasi, pag nabilad and naluto sa araw,
may chance na magshrink, and believe me, ampanget.

di ba same lang yan, masilya (filipino) = putty (english).. depende rin siguro sa brand na gagamitin..

ano sa filipino ang "body filler"?

Premium Body Fillers
3M premium fillers with adhesion promoters, offer the very best in all-around performance. Our premium fillers adhere to virtually any surface including wood, metal, aluminum, galvanized steel, fiberglass and concrete. They are also non-staining, non-shrinking, creamy and are great for building plugs, patterns, molds, prototypes and general repair to composite parts. 3M premium fillers are easy to sand and are manufactured with only the highest quality ingredients.

Putties
3M finishing putties have excellent adhesion to wood, metal, aluminum, e-coat, galvanized metal, fiberglass, SMC, epoxy, concrete and primer/paint. These finishing putties are ideal for repairing or filling smaller dents, scratches, gouges and voids. Each product is non-shrinking, non-staining, cures quickly and sands exceptionally well.

http://multimedia.3m.com/mws/mediawe..._id=752nw09202

[7138]

di ba same lang yan, masilya (filipino) = putty (english).. depende rin siguro sa brand na gagamitin..

ano sa filipino ang "body filler"?

Premium Body Fillers
3M premium fillers with adhesion promoters, offer the very best in all-around performance. Our premium fillers adhere to virtually any surface including wood, metal, aluminum, galvanized steel, fiberglass and concrete. They are also non-staining, non-shrinking, creamy and are great for building plugs, patterns, molds, prototypes and general repair to composite parts. 3M premium fillers are easy to sand and are manufactured with only the highest quality ingredients.

Putties
3M finishing putties have excellent adhesion to wood, metal, aluminum, e-coat, galvanized metal, fiberglass, SMC, epoxy, concrete and primer/paint. These finishing putties are ideal for repairing or filling smaller dents, scratches, gouges and voids. Each product is non-shrinking, non-staining, cures quickly and sands exceptionally well.

http://multimedia.3m.com/mws/mediawe..._id=752nw09202

"masilya" and putty (or spot putty), are both body fillers,
ang difference lang nila is yung texture nila,
putty is a finer version of masilya, and used usually
para sa mga spot spot lang na minor imperfections.

putty have a tendency to shrink, especially those
who had it layed over body panels that is exposed
to extreme heat (e.g. engine bay, hood)

1st hand experience ko yung shrinking putty, i had it layed over
part of my engine bay, after 2 week, lumubog or nagshrink yung
part ng pinatakpan ko.