pano tanggalin yung dirt and grime (libag) sa pagitan ng emblems?

[170kphlang]

any suggestions guys without damaging the paint (i'm talking about the emblems at the rear [1.6gli, vti, mx, etc..])? at binabalak ng friend ko na tanggalin na yung emblems sa vehicle niya para clean look pero usually kapag tinanggal mo emblem naiiwan yung marka ng libag ng emblem. and iadd ko narin san pwede ikapit yung 4 pt. seatbelt kapag ayaw mo igive up yung rear seats? thanks.

[empy]

spray some Quick Detailing solution on a q-tip (cotton bud)

[mbeige]

Old toothbrush gamit ko.

[wildthing]

goo gone can work on the old sticker (double sided sticker gamit ng emblem di ba).

dati gamit ko meguire's step 3 (yung pinaka matapang), applied by tooth brushed and rubbed with clean white cotton towel.

[alwayz_yummy]

yup, cleaner, toothbrush and cottontips

[empy]

ay hindi ko napansin yung tanong about actually removing the emblem

here's a secret that was taught to me before....dental floss :2thumbsup:

[danesjr]

ay hindi ko napansin yung tanong about actually removing the emblem

here's a secret that was taught to me before....dental floss :2thumbsup:

masyado manipis. sinulid dre!

[BlackMagic]

use and old credit card to slice off the adhesive.

[a2moveu]

pour hot water to soften adhesive then use a nylon to pull the emblem out.
:war:Apply ord. rubbing compound on cotton bud to remove dirt inbetween letters/logo. be sure to wax it after. (That is if you are not going to remove your emblem)

[chain]

I think there's been a thread about this before.

pero ganito:

• you can remove the emblem first with a dental floss, clean up the remaiining area with clay, an old CC and some polish. then rewax. reattach if you want.

or

• if you don't want to remove it, use a BBQ stick wrapped in a MF. clay, polish using this to get into the crevices. then rewax.