Detailing Thread [For Newbies][ARCHIVED]

[madkatz]

Wag shampoo masisira yung clay yung mothers clay bar ko lumambot siya ng todo ng tumagal parang napupunit siya pag nirub ko sa paint di na natatanggal yung contaminants. Nung nag bukas ako ng bagong clay bar ang laki ng difference sa texture ng clay na nagamitan ng shampoo as clay lube.

Optimum No rinse na lang in clay lube dilution para practical at safe

up with this one, the clay lube you guys used last monday was already ONR diluted for clay lubrication

[madkatz]

Doc yung Kawasaki Leaf Blower 1,800 lang po

wow thats really cheap!!

[madkatz]

Hair blower mainit eh. Baka watermarks pa kalabasan nun.

*Doc
Dapat daw pala mag-cure muna yung 476S bago patungan ng isa pang wax.

hahaha we actually used a hair blower before, but the one where you can turn off the heat mechanism and it was still hot enough to cause watermarks.

[madkatz]

*jmpet626: hey check this out, im soooooo itching to get this

http://www.autodetailingsolutions.ne...501-combo.html

[golti]

wow ang mura nun 105-205 gallon combo na un ah! very very tempting hehehe

[jmpet626]

ang mahal pala ng leaf blower... meron ba kayong alternative?

naisip ko yung low capacity air compressor

and... hindi ko to naclear up kay sir Edwin nung monday... safe ba patungan ng non-spray wax (i.e. step 3 or nanoglos) yung collinite 476?

Yung kawasaki na blower bili ko 1.5k lang sa sulit. Taga Team FD yung seller si Migz

[jmpet626]

*jmpet626: hey check this out, im soooooo itching to get this

http://www.autodetailingsolutions.ne...501-combo.html

Wow mura hehe kaso gallon sizes hehe ang lalaki.

[beeco]

Hello, there's no curing time for QD's, but there is a curing time for Nano Glos which is the standard 4 to 8 hours for waxes, so 476 also has a curing time of 8 hours, sealants vary from 12 to 24 hours curing time

as for the hyper polish spray, we actually have one, and its not as aggressive as the Megs 83 DACP, actually all products namely compounds and polishes vary their cut depending on the pads that you use, but so far we would rate hyper polish as something like Mothers Power Polish in terms of removing swirls and probably like Speed Glaze in terms of buffing to a high gloss.

i see.. thanks ma'am!
gusto ko yung 205 chaka 105 hahaha!

[Starex_Gold]

Yung kawasaki na blower bili ko 1.5k lang sa sulit. Taga Team FD yung seller si Migz

Ang mura nga sa kanya. Gusto ko din bumili kasi ang hirap mag-tuyo ng car.. tsaka pang engine detail ko na rin

[jmpet626]

Ang mura nga sa kanya. Gusto ko din bumili kasi ang hirap mag-tuyo ng car.. tsaka pang engine detail ko na rin

Ok siya pang tuyo ng engine bay

[Starex_Gold]

Mabuti naman. Kasi ang hirap mag DIY engine wash pag walang blower. Nakaka takot yung ECU ng Vios

[madkatz]

for the 105 and 205, do i hear chip in? im also already out on my 2nd gallon on both, thats how much i love that combo hahaha

[jmpet626]

for the 105 and 205, do i hear chip in? im also already out on my 2nd gallon on both, thats how much i love that combo hahaha

+1 kahit tig 8oz lang each ng 105 at 205

[golti]

for the 105 and 205, do i hear chip in? im also already out on my 2nd gallon on both, thats how much i love that combo hahaha

game... how will i send the funds? hehehehe

[golti]

anu uli yung gamit ni chief edwin nung monday? M83 (Dual Action Cleaner/Polish) at M66 (Quick Detailer)? kalito tlaga ung pangalan ng Quick Detailer na yan

[scharnhorst]

^^^gumamit rin sya nung compound diba?

mukhang maganda yung spray wax ng optimum, sabi ni sir edwin it's just as good or even better dun sa mga over the counter waxes

edit: lapit na ulit weekend!

*SG: saan mo nakita yung kawasaki na leaf blower? wala dito sa may rob ermita hehe

[Starex_Gold]

doc scharn: Dun sa kinuhaan ni bro jmpet. Kilala ko siya sa TeamFD.

[Chikselog]

*golti

Diamond Cut?

[scharnhorst]

^^^ yan nanaman yung Diamond Cut na yan! :rofl:

*jmpet626 and SG: would he mind if ibigay yung contact number nya?

[PSI]

wag sanang umulang ng 4AM to 630am tom........