help di masyado maka ikot compressor

[sotel]

mga sir bakit kaya yung liteace ko di masyado maka ikot yung compressor tapos nag slide pa belt bago naman po ung belt, sagad nman na po pagka adjust ng belt

[dnomyar]

baka kelangan papalitan bearing....

[dr. d]

mga sir bakit kaya yung liteace ko di masyado maka ikot yung compressor tapos nag slide pa belt bago naman po ung belt, sagad nman na po pagka adjust ng belt

compressor problem malamang. kung gagananciahin, replace bearing lang. kung mamalasin, throw and replace compressor..

[sotel]

mga sir kung papalitan poba ng bearing dina tatanggalin freon?

[dr. d]

mga sir kung papalitan poba ng bearing dina tatanggalin freon?

nasa creativity na yan ng mekanikong gagawa. kung dapat i-baba at i-disconnect ang rubber hoses sa compressor, ay tatanggalin nga ang freon. ngunit kung kaya naman ng mekanikong palitan ang bearing nang hindi i-disconnect ang mga rubber hose, ay hindi ka mawawalan ng freon.
hindi ko masyadong alam yan, dahil sa karanasan ko, ay throw away lahat ang mga compressor na nasira sakin..

[Retz]

pa check and troubleshoot mo na lang sa qualified mechanic.

[sotel]

mga nsir wla nmn tagas na langis sa compressor. sabi kasi saken pag may tagas sira nna daw bearing
ung tensioner mga sir may alog onti

[ghosthunter]

mga sir bakit kaya yung liteace ko di masyado maka ikot yung compressor tapos nag slide pa belt bago naman po ung belt, sagad nman na po pagka adjust ng belt

Two potential cause of your problem.

- compressor bearing itself is worn out and causing the shaft to get stuck.
- AC freon filter is clogged and needs replacing.

Usually its the first problem but it can't hurt to check the 2nd potential cause first because it's easy to check and cheaper to replace a clogged filter too.

[1D4LV]

mga sir bakit kaya yung liteace ko di masyado maka ikot yung compressor tapos nag slide pa belt bago naman po ung belt, sagad nman na po pagka adjust ng belt

compressor bearing yan bro... napapalitan yan.
sabay mo na cleaning.

[sotel]

kakatapos lang magpalinis a/c nung april mga sir

[dnomyar]

or, pa-check mo baka natuyuan na capillary oil...para sure

[sotel]

mga sir nilagyan ko ng asphalt ung belt dina nag slide gumana na uli a/c ko.
ano kaya ang sira mga sir?

[1D4LV]

baka naman luma na yung ac belt?
sa akin, mas ok pa din palitan yan... baka maputol eh.

[jick.cejoco]

or, pa-check mo baka natuyuan na capillary oil...para sure

never heard of capillary oil being used in cars, maybe you are referring to capella oil used in refrigeration or ice makers.

[jvnj]

Bossing,

Most likely its a bearing or other mechanical compressor failure. Better have it repaired immediately as it might cause more damage to your compressor as well as other connected parts. Usually, the freon has to be removed as the compressor has two bearings located at both ends. Better have it estimated (after dismantling) so you may have an idea if its more feasible to repair or replace.

Cheers!