Welcome to all owners of Toyota Fortuner [continued]

[travajante]

Got em. Mr. Offset aluminum ones. Very tight and snug fit.



These are for 110.1 to 106.1 size. Basically any rota suv rim to standard toyota hub. Bought around P2,500 set.

I guess its a must have for anyone doing aftermarket wheels. Personally I didnt have vibrations but yes for peace of mind na din. You dont want your studs shearing off in a bad bump.


Sent from my iPhone using Tapatalk

Good find. Alloy ones are better than polycarbonate which could deform in extreme heat.

Sent from my SM-G970F using Tapatalk

[timming_gear]

Thanks for the tip sir! What shop can do that? Any model LC will do ba?


Sent from my iPhone using Tapatalk

Sa mga shell service kaya palitan yon. Madalas kase ako napuputulan ng studs, nung naka L.C studs na ang tibay

Sent from my SM-G965U using Tsikot Forums mobile app

[hdj80]

Sa mga shell service kaya palitan yon. Madalas kase ako napuputulan ng studs, nung naka L.C studs na ang tibay

Sent from my SM-G965U using Tsikot Forums mobile app

Hehe sir may I ask pano kayo napuputulan ng studs? Sa trail po ba? Or sobra wide ng offset nyo boss?

Also, which model LC will fit? Pang 150 series oks na kaya?


Sent from my iPhone using Tapatalk

[JustinRocks]

Ay, if this has been asked, ay sorry, but question ko okay ba ang 265/50r20 na size? Hindi matagtag?


Sent from my iPhone using Tapatalk

[timming_gear]

Hehe sir may I ask pano kayo napuputulan ng studs? Sa trail po ba? Or sobra wide ng offset nyo boss?

Also, which model LC will fit? Pang 150 series oks na kaya?


Sent from my iPhone using Tapatalk

Wide offset yung sakin. Tapos nasasabak minsan sa trail . Ang pag kakaalam ko is pang bj40 ata yung stud naipalit ko basta mas mahaba siya kumpara sa stock.

Sent from my SM-G965U using Tsikot Forums mobile app

[timming_gear]

Ay, if this has been asked, ay sorry, but question ko okay ba ang 265/50r20 na size? Hindi matagtag?


Sent from my iPhone using Tapatalk

Matagtag at babagal

Sent from my SM-G965U using Tsikot Forums mobile app

[gabzprime]

Ilang litro ba ng langis ang kailangan ng first gen fortuner(mine is 2013). Sabi sa manual 7(or 6.9 yata yun). Pero nung nagpa-change oil ako sa talyer 6.5 lang nilagay. Sabi baka sobra daw kung 7L..

Sa casa kasi wala namang binabalik na langis kaya ina-assume ko na 7L yung nilagay nila. Kaya nagulat ako nung hindi ako sa casa nagpa-change oil

[dr. d]

Ilang litro ba ng langis ang kailangan ng first gen fortuner(mine is 2013). Sabi sa manual 7(or 6.9 yata yun). Pero nung nagpa-change oil ako sa talyer 6.5 lang nilagay. Sabi baka sobra daw kung 7L..

Sa casa kasi wala namang binabalik na langis kaya ina-assume ko na 7L yung nilagay nila. Kaya nagulat ako nung hindi ako sa casa nagpa-change oil

the oilstick has two marks, L and H. the volume difference is, depending on car make and model, about one liter.
we should observe which mark the mekaniko is following. that might explain why he poured in this or that amount, only.
also, the oil filter, when replaced, takes up some volume of oil, as well.

[parakitoJDM]

sir puede pa share saan nyo nabili Bilstein shock absorbers, sa local distributor ba?

[jakewise]

sir puede pa share saan nyo nabili Bilstein shock absorbers, sa local distributor ba?

I used to have this supplier, Makna Mktg Corp located at Santolan Road, San Juan with contact number 02-4778577 and 024776435. Not sure if they are still in the business, but call them first