Toyota Revo Owner's Club Details

[red_one]

Tanung ko lang po kung san nakakabili ng mura na alarm casing ng 2002 revo. Nabasag na po kasi yung amin (pati yung spare) at nakatape nalang.

if that is still the original remote, wala na nabibili na casing nyan. you can opt to replace the whole car alarm system. around P1,500 for Viking brand including installation. else, ingatan na lang yang remote nyo.

[crazyivan]

Meron mabili casing ng remote. Search mo kang sa sulit.com or ayosdito.com

[crazyivan]

Meron mabili casing sa alarm remote. Search nyo lang sa sulit.com or ayosdito

[crazyivan]

Hi,

Tanung ko lang po kung san nakakabili ng mura na alarm casing ng 2002 revo. Nabasag na po kasi yung amin (pati yung spare) at nakatape nalang.

Meron sa sulit.com or ayosdito. Search mo lang.... Kakabili ko lang for my Revo SR 2004

[GTi]

Hi,

May mga questions po ulit ako:

1. Tanung ko lang po kung san nakakabili ng mura na alarm casing ng 2002 revo. Nabasag na po kasi yung amin (pati yung spare) at nakatape nalang.


2. at may nabibilhan pa po ba ng quad headlamp? Balak ko po kasi palitan yung amin kasi pina convert ko ng h.i.d. Si revo, kaso mahilig ako mag flash ng high beam pag umaga eh, ang tagal kasi bumuga pag sa hid.

3. Pati po ba pag humihina yung power, ibig sabihin kailangan na i-calibrate yung injectors(diesel po sa amin)? Nabasa ko po kasi sa ibang forums (different diesel vehicles) na kadalasan yung solusyon pag humina ang power.

Thanks sa mga magrereply po!


Posted via Tsikot Mobile App

Sulit na rin yang alarm mo bro! Time to change to a more sensitive unit. On a side note, yung original remote ko OK pa. Yung isa tumotopak minsan at kelangan pokpokin. Pero yung isa parang bago pa. Last year nga lang nasimula gamitin eh.

As for your headlight concerns, I suggest you look for garyq. He's the resident expert. What I do (1st gen design) is open only the headlamp integrated and bumper fogs and use the main beams for flashing.

I have done calibration, and it did not increase power. It did, however, improve emissions. It was already smoke belching heavily upon reaching 3000rpm at that time.

Sent from my GT-I9100 using Tapatalk 2

[pehdehceh]

if that is still the original remote, wala na nabibili na casing nyan. you can opt to replace the whole car alarm system. around P1,500 for Viking brand including installation. else, ingatan na lang yang remote nyo.

Yes po yung original remote. Ay ganun po ba, sayang naman kung papalitan kasi ok pa naman siya eh, case lang naman yun problema. Thanks for the suggestion!


Posted via Tsikot Mobile App

[pehdehceh]

Sulit na rin yang alarm mo bro! Time to change to a more sensitive unit. On a side note, yung original remote ko OK pa. Yung isa tumotopak minsan at kelangan pokpokin. Pero yung isa parang bago pa. Last year nga lang nasimula gamitin eh.

As for your headlight concerns, I suggest you look for garyq. He's the resident expert. What I do (1st gen design) is open only the headlamp integrated and bumper fogs and use the main beams for flashing.

I have done calibration, and it did not increase power. It did, however, improve emissions. It was already smoke belching heavily upon reaching 3000rpm at that time.

Sent from my GT-I9100 using Tapatalk 2

Mas sensitive po ba yung mga aftermarket na alarm? Sayang po kasi kung papalitan namin eh. Haha. Buti pa sa inyo may ok pa na remote.

Napapansin ko po kasi sa amin na medyo di na katulad ng dati yung performance. Pero napachange oil na namin (at around 120k km) yung transmission at differential fluid dati, medyo nag ok naman yung performance. Pero ngayon (155k km), medyo di nanaman gumaganda yung performance. Yung clutch pala po eh di pa napapalitan since day 1. Ano kaya nagiging source nung problem? At yung mga additives sa engine effective po ba or more harm sa engine?


Posted via Tsikot Mobile App

[John Carlo]

Hello, I have 2002 2L SRJ Revo...

Can I change the whole air filter asembly? or just the air filter?

[dr. d]

Hello, I have 2002 2L SRJ Revo...

Can I change the whole air filter asembly? or just the air filter?

normally, we just replace the filter. is there a reason why you would want to replace the entire assembly?

[John Carlo]

To make it faster

Can we use a washable? or only dipoable?