Toyota Innova Owners & Discussions [continued 3]

**Deestone** · January 15th, 2021 12:02 PM

Originally Posted by dr. d

LED bulbs usually require less power than the equivalent filamented bulbs. as such, i do not expect an increase in busted fuses because of the replacement from filament to LED.
so why does the CEL light up, kaya?

That's the big question that only scanner can verify. My vehicle also sometimes CEL do lit up during long idle.

Sent from my SM-N910C using Tsikot Forums mobile app

**dr. d** · January 15th, 2021 12:03 PM

Originally Posted by Deestone

That's the big question that only scanner can verify. My vehicle also sometimes CEL do lit up during long idle.

Sent from my SM-N910C using Tsikot Forums mobile app

does the CEL light up when you have a busted bulb, or when you remove the bulb from its socket??

**Deestone** · January 15th, 2021 12:05 PM

Originally Posted by dr. d

does the CEL light up when you have a busted bulb, or when you remove the bulb from its socket??

Nope it doesn't lit up at all I have experience busted bulb brake and even headlamp it just doesn't connect.

Sent from my SM-N910C using Tsikot Forums mobile app

**dr. d** · January 15th, 2021 12:08 PM

i have the previous innova.
i have LEDs in my front park lights and in my rear plate light.
no problems.

**Erick Chavez** · January 18th, 2021 10:08 AM

Originally Posted by dr. d

get the bolts that you just removed, and screw them back in.
that should cover the holes, and also ensure that you do not misplace them bolts, when you decide later to re-install the seats.

it is easy to lose or misplace those bolts, if you do not re-screw them back in.

Sir, the hole is about 8 inches wide and 4 inches tall (estimate)

**Erick Chavez** · January 18th, 2021 10:12 AM

Originally Posted by dr. d

i have the previous innova.
i have LEDs in my front park lights and in my rear plate light.
no problems.

mine was 2019 innova, two (2) fuse got busted when replacing brake bulb with LED,,, fuse on inside the hood and another on the cabin near on top of the accelerator pedal (both marked "park" 10a)

**bxr monkey** · January 18th, 2021 10:15 AM

Originally Posted by Erick Chavez

Sir, the hole is about 8 inches wide and 4 inches tall (estimate)

Question, butas ito sa metal frame, or butas sa plastic trim?

**Erick Chavez** · January 19th, 2021 11:09 AM

Originally Posted by bxr monkey

Question, butas ito sa metal frame, or butas sa plastic trim?

plastic trim... iniwang hole nung inalis yung 3rd row seat po

**dr. d** · January 19th, 2021 11:21 AM

Originally Posted by Erick Chavez

plastic trim... iniwang hole nung inalis yung 3rd row seat po

can you live with it?

kasi, if enough people can not live with it,
i am confident someone is going to market a "cover".
google nyo po. baka meron na.

ask the casa. they might have just what you need.

happy hunting.