Toyota Innova Owners & Discussions [ARCHIVED]

**j_avonni** · November 6th, 2005 05:59 PM

16 K; acquired Feb 26; J-Gas; No problem so far.

**larshell** · November 7th, 2005 02:37 PM

A_eyE- ODO 4k+/D4d
Takumi- ODO 11k/D4d
rcl_inno- ODO 6k/
lienathan- ODO 3543/VVti
BlueBimmer- ODO 1.8k/D4d
bourbonic- ODO 2.5k/VVTi
Jaeger- ODO 5k+/D4d
bonglisa-ODO 11k/D4d
j_avonni-ODO 16k/VVTi
Lord-ODO 15k/D4d

So far j_avonni has the Highest ODO reading. Thanks sa mga nag reply, sana yong iba din paki post nyo din.Thanks

**leinahtan** · November 7th, 2005 04:03 PM

Originally Posted by apexi_66

Hirap lang ng DIY mo, sealed sya masyado. Yong init di makasingaw. Baka may pumutok o masunog in the long run. Ingat lang dre.

Upgraded my right foglamp back housing cover with a DIY wheel well. Used a vinyl matting cut to shape and fixed it with bolts. Ok na cguro ito against water splashes sipping inside the lamp. Ano sa palagay nyo?

**inoba** · November 7th, 2005 04:05 PM

1.9k ODO reading, got our unit(D4d) last August

**inoba** · November 7th, 2005 04:05 PM

1.9k ODO reading, got our unit(D4d) last August

**Takumi** · November 7th, 2005 06:29 PM

Originally Posted by leinahtan

Upgraded my right foglamp back housing cover with a DIY wheel well. Used a vinyl matting cut to shape and fixed it with bolts. Ok na cguro ito against water splashes sipping inside the lamp. Ano sa palagay nyo?

This I gotta try!

**kuyapete** · November 7th, 2005 06:38 PM

10,400+ kms, April, 2005, D4D matic, no problems.

**lord** · November 7th, 2005 09:16 PM

Originally Posted by larshell

A_eyE- ODO 4k+/D4d
Takumi- ODO 11k/D4d
rcl_inno- ODO 6k/
lienathan- ODO 3543/VVti
BlueBimmer- ODO 1.8k/D4d
bourbonic- ODO 2.5k/VVTi
Jaeger- ODO 5k+/D4d
bonglisa-ODO 11k/D4d
j_avonni-ODO 16k/VVTi
Lord-ODO 15k/D4d

So far j_avonni has the Highest ODO reading. Thanks sa mga nag reply, sana yong iba din paki post nyo din.Thanks

17K + na ako. =)

**Takumi** · November 7th, 2005 09:22 PM

Leinahtan: Pa rivet ba ginawa mo dito?

**leinahtan** · November 7th, 2005 09:49 PM

Originally Posted by Takumi

Leinahtan: Pa rivet ba ginawa mo dito?

No. I didn't use any rivets. Just bolts and nuts. There are two provision holes on top left and right. Hanapin mo na lang. Ung sa ibaba, I bore 4.5mm hole on diagonal bracket. Yun lang, bale 3 fixed points lang. Then I sprayed black anti rust paint on the bolts to prevent corrosion.