New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 14 of 14 FirstFirst ... 41011121314
Results 131 to 140 of 140
  1. Join Date
    Apr 2009
    Posts
    59
    #131
    Hi Macky!
    Now you know that i`m just a foreinger not a foreigner. Sorry, ano ba ang EB`s and what is CSP?

    Ngayon may bago nanaman akong mga tanong for you and everybody else.

    1) Lets say i started my esteem early in the morning (so obviously malamig pa ang engine at off pa ang engine fan), pag i-on ko agad ang A/C ay dapat bang sabay din mag on ang engine fan regardless na malamig pa ang engine ko? At pag i-off ko ang A/C ko (still with a cold engine) ay dapat mamatay din ang engine fan?
    Pano sa akin pag i-on ko ang A/C ay hindi nag o-on ang engine fan (not unless mainit na ang engine), so nag ha-high pressure ang A/C system ko (verified with A/C gauges hooked up) coz di kaya nang A/C fan only na ma cool yung condenser, so no cold air!

    2) So kung mainit na ang engine ay obviously mag o-on ang engine fan, at pag malamig ay mag o-off ang engine fan. Pero pag pinatay ko na ang engine ko (while its still very hot) ay dapat bang tumuloy pa for a short time yung takbo nang engine fan until the engine gets cooler at dun palang siya mamamatay OR basta na lang mamamatay ang engine fan pag pinatay ko na ang engine (even if hot pa yung engine) ?

    Thanks Again!
    patrick

  2. Join Date
    Oct 2002
    Posts
    1,107
    #132
    Quote Originally Posted by Bud_wiser View Post
    I have some quick questions re Suzuki parts and service:

    Can you recommend a non-casa shop that specializes in Suzuki repairs? I have a 1997 Esteem that needs some work done.

    What surplus shops can you recommend that have a lot of Suzuki parts? Or maybe a shop that has the most number of Suzuki parts available? I'm looking for a driver's side door, kasi I think the last owner of my car had an accident and the door isn't "straight" and I'm thinking of changing the door na lang.
    Try Olympia along Araneta Ave. Look for Jonathan.
    (02) 716 5386 to 89


    Quote Originally Posted by Bud_wiser View Post
    I'm looking for that panel that cover the bottom of the engine bay (not sure what that part is called)? Meron ba nito sa surplus shops?
    Got mine sa casa (Suzuki Alabang). Yung right side covering the compressor costs less than P400 lang including installation.



    Quote Originally Posted by Bud_wiser View Post

    Zee claims to recondition shocks. Ok na to have this done? Is it really as good as new?

    Can you find interior parts in surplus shops?
    Check mo if liquid type ang dampers mo. AFAIK, yung shock refilling is only good for liquid type dampers. Besides Zee, Cruven also recondition shocks. It's good as new for the first 3mos then pa-refill refill ka uli. It's cheap and can suffice if with limited budget ka.

  3. Join Date
    Jan 2012
    Posts
    14
    #133
    good PM esteem owners!

  4. Join Date
    Aug 2011
    Posts
    6
    #134
    Hello mga Sirs ,

    My brother accidentally broke the back glass of my ride, any idea on how much would it cost a back glass for my ride? Nag tanung na ako sa Aguila AutoGlass and ang sabi nila mga 8K daw, parang it is expensive para sa back glass, right? They told me na original daw yun, and i am looking for semi class type of it..


    TIA for the Suggestions/Advise.

  5. Join Date
    Aug 2012
    Posts
    1
    #135
    San ba mrn 2nd hand Jan wheel cover ng esteem??

  6. Join Date
    Aug 2012
    Posts
    1
    #136
    Rare parts to pero hindi naman sirain..

  7. Join Date
    Jun 2009
    Posts
    1
    #137
    mga sir ask ko lang pag matic na esteem, ano ba ang mga kailangan i check? planning to buy a 2nd hand pero wala ako idea sa suzuki.

    mas maselan ba ito compared to toyota or nissan with regards to parts and service centers?

  8. Join Date
    Apr 2009
    Posts
    59
    #138
    Hi Guys!
    Meroon akong 1998 Automatic transmission GLX. Baka masama na yung driver side Outer Constant Velocity bearing (yung sa may gulong). Ang sabi nang mekaniko ay di daw mahihiwalay and velocity bearing sa axel shaft unless may "special tool" na gagamitin dahil imposible daw matanggal yung circlip (lock) sa dulo nang axel dahil sobrang malalim ito sa velocity bearing. Ano palagay ninyo? Baka naman may ibang paraan dito? o baka naman puede gumawa o magpagawa nang "pinoy style special tool" ? Ano kaya? Pero kung kailangan palitan paano ko kaya tatanggalin ito? Pukpukin ko lang ba nang malaking martilyo???

    Second question- Para matanggal ko ang kabilang dulo nang front axel shaft na naka pasok sa transmission, ang pagka intindi ko ay kailangan mo nang malaking screwdriver o pang sikwat para matanggal ito. Ubod nang tigas ba ito tangalin? Mahirap na kasi kung pipilitin ko lang di ba? Thank You!
    patrick

  9. Join Date
    Apr 2009
    Posts
    59
    #139
    Hello Everyone!
    There is a little fluid leak coming out of the cv joint Axel inserted on the transmission side (right side of car). Maayos naman pagka pasok nang axel sa transmission. Baka yung oil seal sa loob nang transmission? Is it easy to remove this seal? Di ko pa kasi nagagawa ito. How do i remove it? This is our everyday car, so i need to fix it asap. A response will be appreciated, thank you!
    patrick

  10. Join Date
    Nov 2013
    Posts
    621
    #140

Page 14 of 14 FirstFirst ... 41011121314
Suzuki Esteem Wagon [Merged]