Suzuki Ertiga - 7 seater MPV

**Flipo** · June 16th, 2015 06:41 PM

Originally Posted by snoopyboy

Yung akin, 30k discount plus all the freebies you mentioned except back up sensor. Bank PO pa yun. Sana taasan pa yung discount. Pero as long happy ka na deal nyo ok na yun. As far as I know may rustproofing na yung mga brand new cars. No need to pay for rustproofing

30K din yung umpisa, pero hindi 3M tint, 9platinum only0, no back up sensor, and central lock/ alarm. I wanted it done na lahat sa casa kaya naging 20K na lang yung natira sa cash discount.

- - - - - - - - - - - - - - - - - - - - - -

Originally Posted by snoopyboy

Yung akin, 30k discount plus all the freebies you mentioned except back up sensor. Bank PO pa yun. Sana taasan pa yung discount. Pero as long happy ka na deal nyo ok na yun. As far as I know may rustproofing na yung mga brand new cars. No need to pay for rustproofing

30K din yung umpisa, pero hindi 3M tint, 9platinum only0, no back up sensor, and central lock/ alarm. I wanted it done na lahat sa casa kaya naging 20K na lang yung natira sa cash discount.

**skyglider** · June 16th, 2015 07:19 PM

Originally Posted by GPS60

Hi, long-time lurker here - just to share some information that might be useful.

Had the 3rd PMS of the Ertiga GLX A/T 10K Kms. Total cost was Php5,300 includes 4L of Suzuki-approved TOTAL-made mineral oil, 4 pcs regular NGK spark plugs, oil filter and "all-around" check-up and cleaning i.e. underchassis, tierods, brake cleaning etc... took nearly 6 hrs. I have a dashboard camera that recorded the whole PMS unknown to the service crew since they forgot to remove the key from the ignition - it's an add-on unit made by Transcend DrivePro 220.

Cost is much more expensive than Honda's (we use to have the older Jazz) - Php5,500 / 10K kms / six months compared to Suzuki's every 5K kms PMS. They require replacement of spark plugs every 10K Kms. Better get the Iridium-type * Php600+ each that lasts 100K Kms before replacement. Nearly similar cost to the PMS of a 2014 Altis 1.6V. Service center is E. Rodriguez / Wheels.

Sir sa akin almost 6k from Suzuki Kalookan. Medyo di ko nga lang nagustuhan kasi according sa manual it's only 3.1L sa langis. Di ko nakuha yung .9L kasi sabi drum na daw ang langis nila. Next time gawin ko bibili na lang ako ng langis sa kanila para naka plastic bottle. Change air filter and aircon filter din. Yung sa Honda City ko before every 10k din ang PMS pero fully synthetic ang gamit. I read here in tsikot (oil engine thread) na pag madalas malayo ang biyahe mo recommended is fully synthetic talaga, pero kung malapitan lang mas ok ang ordinary/mineral oil lang.

Sa spark plug naman stock lang ako kasi di naman ako nagre-racing-racing eh... although parang mas mura nga kung Iridium type... pero di kaya lumakas naman consumption sa gasolina natin?

**car06** · June 16th, 2015 07:27 PM

Ako 30k discount then haggle central lock with keyless, back up sensor and standard freebies. Kaya ung 25k na discount pwede pa taasan

**Teeger** · June 16th, 2015 08:27 PM

Originally Posted by enzology101

Narereset ba ung kms sa sasakyan?kasi parang nagiba ung akin?posible ba un

Nagiiba sir yon Kms. habang tumatakbo ang sasakyan if you're referring to Average Kms. counter sa dashboard.

**snoopyboy** · June 16th, 2015 08:32 PM

Oh ok. I remember noon na gl manual ang kukunin din namin, ayaw ibigay yung central lock alarm and 3m tint. After a month, sa glx AT na kami nag haggle. Anyway baka mas maliit mark-up nila sa gl manual (hula lang) kaya bawas discount in exchange of freebies.

**Teeger** · June 16th, 2015 08:43 PM

Sa discount and freebies magkakaiba talaga yan kada dealer kasi magkakaiba mga owner. So, kanya kanyang diskarte sila sa marketing.

Regardless of how much discount and what freebies you get ang importante satisfied at masaya ka pakuha mo ng unit. Added value din na kasundo mo yon mga staff and crew pati manager where you got your unit kasi mas okay na meron continuity yon mula sa pagbili mo up to PMS.

**Teeger** · June 16th, 2015 08:58 PM

Originally Posted by Flipo

Magiging 20K na lang, kasi ibabawas yung hinaggle ko na central alarm lock,3M tint, back up sensor, free 3 yrs. lto reg, and standard freebies.
Mga sir pakisagot yung tanong ko rustproofing undercoat...

Kung sa akin sir okay na yan offer syo ng dealer na kausap mo kasi mga 10K+ din equivalent amount ng central lock w/ alarm, 3M tint, backup sensor at undercoat.

Undercoat/rustproofing is an option. Better to have it before mo kuhanin at gamitin ang unit para protected na kaagad ang ilalim sa simula pa lang.

**Flipo** · June 16th, 2015 09:37 PM

Originally Posted by Teeger

Kung sa akin sir okay na yan offer syo ng dealer na kausap mo kasi mga 10K+ din equivalent amount ng central lock w/ alarm, 3M tint, backup sensor at undercoat.

Undercoat/rustproofing is an option. Better to have it before mo kuhanin at gamitin ang unit para protected na kaagad ang ilalim sa simula pa lang.

According to my SA, na rust proof na daw sa manufacturing plant sa India at pagdating dito ay na-undercoat daw sa plant sa Laguna.

Can somebody confirm this?

- - - - - - - - - - - - - - - - - - - - - -

Originally Posted by Teeger

Kung sa akin sir okay na yan offer syo ng dealer na kausap mo kasi mga 10K+ din equivalent amount ng central lock w/ alarm, 3M tint, backup sensor at undercoat.

Undercoat/rustproofing is an option. Better to have it before mo kuhanin at gamitin ang unit para protected na kaagad ang ilalim sa simula pa lang.

According to my SA, na rust proof na daw sa manufacturing plant sa India at pagdating dito ay na-undercoat daw sa plant sa Laguna.

Can somebody confirm this?

**b_9904** · June 16th, 2015 09:40 PM

Originally Posted by Flipo

According to my SA, na rust proof na daw sa manufacturing plant sa India at pagdating dito ay na-undercoat daw sa plant sa Laguna.

Can somebody confirm this?

- - - - - - - - - - - - - - - - - - - - - -

According to my SA, na rust proof na daw sa manufacturing plant sa India at pagdating dito ay na-undercoat daw sa plant sa Laguna.

Can somebody confirm this?

Lahat naman meron na nyan. Kaso, manipis lang mga factory coats. So, lagay mo sa budget mo rust proofing and undercoating for like... a year or two? Dunno when actually.

- - - - - - - - - - - - - - - - - - - - - -

Originally Posted by Flipo

According to my SA, na rust proof na daw sa manufacturing plant sa India at pagdating dito ay na-undercoat daw sa plant sa Laguna.

Can somebody confirm this?

- - - - - - - - - - - - - - - - - - - - - -

According to my SA, na rust proof na daw sa manufacturing plant sa India at pagdating dito ay na-undercoat daw sa plant sa Laguna.

Can somebody confirm this?

Lahat naman meron na nyan. Kaso, manipis lang mga factory coats. So, lagay mo sa budget mo rust proofing and undercoating for like... a year or two? Dunno when actually.

**Flipo** · June 16th, 2015 10:10 PM

Originally Posted by b_9904

Lahat naman meron na nyan. Kaso, manipis lang mga factory coats. So, lagay mo sa budget mo rust proofing and undercoating for like... a year or two? Dunno when actually.

- - - - - - - - - - - - - - - - - - - - - -

Lahat naman meron na nyan. Kaso, manipis lang mga factory coats. So, lagay mo sa budget mo rust proofing and undercoating for like... a year or two? Dunno when actually.

Hinahaggle ko nga yung rustproofing , at kung laiagyan pa daw ulit it will become the 3rd time!

- - - - - - - - - - - - - - - - - - - - - -

Originally Posted by b_9904

Lahat naman meron na nyan. Kaso, manipis lang mga factory coats. So, lagay mo sa budget mo rust proofing and undercoating for like... a year or two? Dunno when actually.

- - - - - - - - - - - - - - - - - - - - - -

Lahat naman meron na nyan. Kaso, manipis lang mga factory coats. So, lagay mo sa budget mo rust proofing and undercoating for like... a year or two? Dunno when actually.

Hinahaggle ko nga yung rustproofing , at kung laiagyan pa daw ulit it will become the 3rd time!