Results 1,391 to 1,400 of 1640
-
Verified Tsikot Member
- Join Date
- Oct 2003
- Posts
- 101
November 26th, 2011 06:46 PM #1391ordered the cooper st maxx na bai and in progress of getting the ironman suspension kit from bacolod.
wheels nalang ang di ko ma decide sa ngayon. maganda ang ballistic pero parang transformer
gusto ko procomp 7031 dahil malinis at simple ang design. tapos chrome ang lug nuts to go along the stud bolts on the lip. btw, wala pa may ganon na rim dito sa amin, so di pa common
-
November 26th, 2011 07:00 PM #1392
-
-
-
Verified Tsikot Member
- Join Date
- Oct 2003
- Posts
- 101
November 27th, 2011 03:01 AM #1395oo nga, my sound setup has been in storage for a long time after i sold my crosswind. pinag isipan kung ikabit ang powkel separates sa montero pero until now hindi pa rin nagawa. that goes to show that i am no longer interested in car audio and contented with the stock sound
-
November 27th, 2011 08:25 AM #1396
-
November 27th, 2011 03:07 PM #1397
Naka-FM na nga lang ako palagi. Tumatanda na tayo, bai.
Back to topic:
http://i6.photobucket.com/albums/y209/doy/Photo0513.jpg
Frontspace is around 4 inches so kung 5 inches yung backspace ko at 9 inches ang rim width, exactly 4 inches dapat ang frontspace.
-
November 27th, 2011 03:36 PM #1398
Cusco Oil Catch Tank with 15mm inlet (sorry for the dirty engine and slightly slanting tank mount):
http://i6.photobucket.com/albums/y209/doy/Photo0514.jpg
http://i6.photobucket.com/albums/y209/doy/Photo0516.jpg
http://i6.photobucket.com/albums/y209/doy/Photo0515.jpg
Tank is mounted firmly using the 2 stock protruding #4 stud bolts from the firewall (just remove the mounted plastic cable fasteners). Drawback is slightly slanting yung position ng tank (pero atleast secure ang tank kahit ihataw sa rough roads). Additional items used were two 3/4 inch hose clamps (for tank end), three #4 slim head bolts, nuts, washers, and lock washers (masikip if using the supplied #4 nuts and bolts; masyadong malaki ang ulo ng supplied bolts). Black hoses used is the stock 1-piece rubber hose cut in half for engine and intake end. The supplied 5/8 inch hose clamp was used to connect the stock rubber hose with the supplied barbed silicon hose (stiff kahit tight na ang hose clamp). Installation time is around 1 hour with some acrobatic moves around the engine bay during bolt tightening.
-
November 28th, 2011 12:43 AM #1399
nakakagulat yung mga prices nung mga 16" ngayun ah less than 30k nalang hehe parang biglang nagsibabaan....san kaya gawa yung mga yun? like yung ballistic? ganda rin ng design...
-
Verified Tsikot Member
- Join Date
- Feb 2010
- Posts
- 7
November 28th, 2011 12:10 PM #1400took the risk, mounted 16x10s and made DIY modification on fenders and mudguard. Ngayon wala ng rubbing.
Choice I would have made as well.:nod:
2024 Innova Zenix 2.0 V CVT (non-HEV) vs Innova...