Results 941 to 950 of 1672
-
June 14th, 2007 06:15 PM #941
*isuzoom you been hit by the murphy's law hehe
*maxbuwaya how's maarat na? havent been there for more than a year na, last time aku nandun yung last year's mens health pa
btw saw an accident at slex last weekend involving a jazz (ata) rearbumped by a vehicle tapos when i passed by, the jazz was carrying bikes sa likod ouch!na cut short trip nila to sta rosa, man if it were me on the jazz id been more worried for my bikes mukhang totaled lahat ng bike eh
-
Tsikot Member Rank 4
- Join Date
- Oct 2002
- Posts
- 1,842
June 16th, 2007 01:31 PM #942
-
-
-
June 17th, 2007 06:16 PM #945
hehe viewing mode or basa mode lang ako lagi
, kasi recently puro bike rack/carrier ang topics,pero enjoy din naman kahit basa mode lang.
lapit na dn mabuo bike ko tantsa ko mga between 4-5k na lang gagastusin ko hehe, and i decided na din na mag palit from 8-speed to 9-speed para wala na ako maging problem in the future...
-
BANNED BANNED BANNED
- Join Date
- Oct 2002
- Posts
- 3,790
June 17th, 2007 09:21 PM #946patanong naman...anong cheap and good na head post (yun pede sa suntour XCR).... na overtightened ko yung cheapo ko na head post (tig P280) e bali yung isang tenga..
ayoko na nung ganun...kaso baka naman yung tig P900 or more magiging ganun din..
near finish na yung non-high-end ko na bike -
Body - Taiwan na "Attack Racing" ang tatak - around P3500
Centro ng para sa plato - P450
Fork - Taiwan Suntour XCR - P2800
Headset - P280
Gulong - pair of Maxxis 26x2.35 - P480* (with interior)
Rims - hand-me-down na probably 10y.o. na metal rims japan made (tapos pina powder coat ko) - cost about P200-300* (prep and powder coating)
Spokes - aluminum na mumurahin
Hubs/Centro - pang BMX anodized aluminum (plan to replace it kung hindi magagawan ng paraan yung rear na i-centro because of the 8 speed gear) - P200*
Converted to quick release yung hubs - P150*
Plato, plastic pedals and shifters are shimano (not all are original) - I think it was around P1500-2000 ang inabot.
Brake (wala pang front) - cheap immitation disk brake - between P500-800 (got it from davao)...mahina ang pagpreno baka palitan ko ng matino.
Seat and aluminum seat post - oridinary bike seat with good foam - inabot lang ng P300 yun.
Handlebar - cheapo aluminum - P150-200 (forgot the actual price)
Total is roughly about P12K na...nearly two years to build and still counting...hehehe
All labor ng assembly are free kasi ako nagbubuo (except tire balancing ng rayos).
-
June 17th, 2007 09:38 PM #947
wildthing, head post or head set? or yan yung parang bulaklak na nasa loob ng steering tube?
-
June 17th, 2007 09:52 PM #948
hehe itatanung ko dn sana sakanya yan....
*wildthing, kung head set po yan,parehas kasi tayo ng fork, ung brand nun akin is FSA range nya is 150-300pesos basta sabihin mo lang yung pang oversize 2 klase daw kse yung head set(pero most of the fork ata is oversize un tube insertion ng fork sa frame)Last edited by iskulbukul; June 17th, 2007 at 09:54 PM. Reason: fix gramar
-
BANNED BANNED BANNED
- Join Date
- Oct 2002
- Posts
- 3,790
June 17th, 2007 09:54 PM #949head post sir... yung nagkokonect sa tube ng fork (hindi ko kasi pinutol yung XCR para mataas) and the handle bar
head set yung merun bearing di ba?
-
June 17th, 2007 09:58 PM #950
wildthing, stem tawag dun
Try mo maghanap ng low end na FSA or Turbolite stems. Meron less than 1K nyan.
someones are (at last!) loudly asking, "why did they turn off the countdown timers?"
SC (temporarily) stops NCAP