Anything And Everything Pc

FrankDrebin · September 15th, 2004 06:56 PM

pk, dyan ka ba bumibili ng pc parts mo?

**pajerokid** · September 15th, 2004 07:30 PM

iba iba ser.

I just got a Lian Li All aluminum case from PC options.

Fave shops ko rising sun and PC options. Mura and madaling kausap come RMA time. Unlike PCX na buwan bago palitan ang unit.

Kwento lang.... Yung defective kong Radeon 9800NP binenta ko sa officemate ko for a paltry sum. He RMA'ed it sa PCO tapos pinalitan ng 9800PRO!!!!!! Lucky dog.

**theveed** · September 15th, 2004 08:52 PM

thanks pre... sana bigyan nalang ako laptop ng opisina para di muna ako bibili hehehe

**pajerokid** · September 16th, 2004 11:14 AM

Da best yun veed! Anything free is good hehe.

**theveed** · September 16th, 2004 01:46 PM

:D

**ghosthunter** · September 16th, 2004 02:13 PM

Nakakainis... I want to get myself a XPC unit but I am simply too cheap to spend on it. :D

a unit costs about P9000 just for the case, ps, motherboard pa lang.

**pajerokid** · September 16th, 2004 05:41 PM

I was supposed to get the 9k shuttle model too. pero add the processor, memory hdd etc, the costs would actually skyrocket. parang hindi kasi practical for something whith only 200+ W psu (hirap i-upgrade)

**mazdamazda** · September 16th, 2004 07:06 PM

should i wait for the new vidcard format before purchasing a new PC?

**pajerokid** · September 16th, 2004 07:56 PM

John, not really. AGP versions of the same chipset can still perform at the same levels as the PCIe versions..... kasi wala pang SW that can utilize the 16x PCIe interface.

Besides, AGP will still be around for a couple of years.

**ghosthunter** · September 16th, 2004 10:08 PM

Originally posted by pajerokid
I was supposed to get the 9k shuttle model too. pero add the processor, memory hdd etc, the costs would actually skyrocket. parang hindi kasi practical for something whith only 200+ W psu (hirap i-upgrade)

In my case, I already have memory, HDD and CDROM drive I could use for it. But I still need to get a processor and it would be kinda expensive since I already have a Pentium3/800 as a secondary PC. I just want something to replace it for minimum cost.... and maybe cute too. ;)

I'm also concerned about the heat from the video card, is there enough clearance between the AGP slot and the side of the casing to clear the video card's fan?