Tnx FusionR for the new piping

**5Speed** · December 7th, 2003 01:15 AM

hmmmm....ang gaganda talaga nang sasakyan ni woodfire...pati yung strada ang ganda....

parang nakakapanghinayang ipang-harabas....hehehe

**pajerokid** · December 8th, 2003 11:25 AM

Very Nicely Excecuted! Congrats Sir Woodfire!

**mbt** · December 8th, 2003 01:37 PM

aba handang handa na sa sunod na car show hehe :D

**conrad** · December 9th, 2003 11:19 PM

pati ba exhaust pipings pinalitan mo?

ano ginamit mong diameter and what was the stock one?

mainggay ba? how long yung ginamit mong reso?

**OTEP** · December 9th, 2003 11:46 PM

Freemuff ata ang exhaust ni sir woodfire. Hula ko lang ito ha: 2.75". Sinabi na kasi niya sakin dati nakalimutan ko lang. I've seen both his trucks (Pajero and Strada) in person. None of them are noisy like those little sedans with coffee can exhausts.

**woodfire** · December 10th, 2003 01:54 PM

The exhaust system (downpipe, piping, and the muffler) was done by FusionR using stainless steel. yes, 2.75" ang diameter.

**conrad** · December 10th, 2003 09:13 PM

pwede din ba 2.75 sa 4d56 o pang 4m40 yun?

ano ba stock dia size ng 4d56 and the 4m40?

**OTEP** · December 10th, 2003 09:23 PM

Pwede yun 2.75" sa 4m40 at 4d56. 2" or so ang stock diameter.

**notEworthy27** · December 11th, 2003 04:21 AM

anong gamit ng bagong pipes? just wanna know.

diba mas iinit ang hanging kapag dumaan sa steel pipes? how will the new pipes increase turbo and intercooelr performance?

**woodfire** · December 11th, 2003 09:20 PM

Originally posted by notEworthy27
anong gamit ng bagong pipes? just wanna know. diba mas iinit ang hanging kapag dumaan sa steel pipes? how will the new pipes increase turbo and intercooelr performance?

yung stock turbo and intercooler piping ng Mosselman Turbo and the turbo kit sold by Active Autowerke for BMW's are all stainless steel. So I suppose, the temperature has been taken into account by these reputable tubo kit makers in using stainless steel.

Two things to note: 1) pipes should be mandrel bent so that the size diameter even in the bends are all equal; 2) use silicon hoses or silicon humps for interconnection to avoid engine vibration.

i got the idea of stainless steel piping from the mosselman turbo kit i bought for my E36. the pipings are all stainless steel. besides, it definitely looks better than your ordinary rubber.