Philips Ultinon HID Kit

**promdiboy** · November 11th, 2004 01:10 AM

will do sir, panibagong tanggalan nanaman (sayang yung double adhesive tape) hehehe . and thanx again for your quick replies.

**promdiboy** · November 11th, 2004 02:32 AM

sir last question nalang. ang instruction na kasama ay wiring diagram lang kasi. no details. nung bubutasan ko na yung vent cover. detachable pala yung vent cover. then sa loob may small paper na nakatakip. Im not sure kung dapat ba tanggalin ito or doon talaga yun. I took pics para madali maexplain.

**promdiboy** · November 11th, 2004 02:36 AM

after removing cover.

**promdiboy** · November 11th, 2004 02:37 AM

removed rubber tube.

**promdiboy** · November 11th, 2004 02:43 AM

ito yung small round paper (on my finger) na nakaharang sa loob. tinatanggal ba ito upon installation or diyan talaga yan. magdidrill kasi ako sa drain cover ng butas, pero kahit may butas na may harang na paper parin. last hid question ko na to. ayaw ko lang kasi masira.

**promdiboy** · November 11th, 2004 02:48 AM

last pic full view, pls comment kung may mali sa install.

**Ungas** · November 11th, 2004 11:13 AM

I never tried to remove anything under the vent. Wala rin nakasulat sa manual ko na kailangan drill part. I just left it as it is.

Wag po paharapap yung vent, either patalikod or pababa to avoid water/moist ingress.

**promdiboy** · November 13th, 2004 05:09 AM

sir ungas baka interested ka? orig water resistant cover.

BTW I'm not very happy witth the output ng 6000k. I'm planning to buy 4100K bulbs.

**Ungas** · November 13th, 2004 11:48 AM

That's nice, san nakakabili nyan? But don't you think its a bit too late to put them on, I've had the ballasts installed for a couple of years already.

**knicks1204** · November 13th, 2004 12:21 PM

Originally posted by Ungas
[B]Kailangan mo ng whole kit, aanhin mo ang HID bulbs (D2S/D2R) kung walang wirings, kuryente na kailangan ng ballast which will ignite the xenon gas. Fusible links, para mapagana ang on/off & bright/dim. At ang importanteng H4 adapter kit, para sa existing headlight housing. Hindi magkakasya ang D2S sa H4 kung walang adapter inbetween. HTH. :D

e sir ungas, un pong binili kong raybrig na 5000K na bulbs, kailangan pa ng HID kit? or pwede ko lang po ikabit na diretso?

OT... grabe.. ang dami kong natututunan sa inyo.. heheh..:D