Bullbar question...

**ILuvDetailing** · March 29th, 2005 12:28 PM

Gusto mong matest Mojo?

Dumaan ka sa Divisoria, Soler, Ongpin, Recto, Reina Regente, Tomas Mapua, etc. during Rush Hour Saturday afternoon in X-Mas season.

**quiksie** · March 29th, 2005 12:45 PM

forcefield ang katapat niyan. Nabangga din ako yun luma pajero dala ko, yun bullbar tumama sa hood ko ayun imbis na bullbar lang papagawa pati hood pati front na sides. Mula nun tinanggal na yun bullbar at hindi na pinarepair

**Innova_Boy** · March 29th, 2005 01:02 PM

Originally Posted by Mojo

same predicament tayo bros, pedicab ang mortal na kaaway ko ssa daan.

I studied ang pedicab, yung sidecar nila is made of schedule 40 na 1 inch tubo, ma kapal yan.

kaya i decided not to install those aluminum bullbarsa na nabibili, but I have one bent out of schedule 20 1.5 icher na GI na tubo, 1.5 inches ang distanced sa bumper, primed and spray painted, Although di pa test kasi on going pa ang gawa. so tingin ko effective to, kasi nga designed sa pangontra sa sidecar. Brush guard at sa bumper area lang protected, at hindi yung headlamps. halos wala tatamaan kundi yung GI pipe lang. na simulate ko na, by using a sidecar

sa gilid naman, pina labas ko kaunti ang step board ko, pag sa gilid naman sumalpok, stepboard naman ang tatamaan nya muna.

sa likod, brush guard din, across the length ng bumper ko schedule 20 na 1.25 icher na GI pipe, machine bent, at distanced around an 1.5 inches from the bumper.

tas yung gulong hehehe medyo makapal ang gulong ko, 235 series, maski pag gumulong sya kasama sa gulong, yung tip ng GI pipe tatamaan nya muna bago bumper ko o yung small fender area sa sides ng tire well.

try ko dalhin sa binondo minsan, para ma test.

pero yung design ko di uubra sa innova, masyado mababa ang innova,at medyo malaki ang fender area exposed sa tire wells. at least maging effective to, yung ground clearance ng is mataas, para puro tubo, stepboard, at gulong tamaan nila

May i ask what is your ride that you have install this bullbars??

**Innova_Boy** · March 29th, 2005 01:06 PM

Originally Posted by ILuvDetailing

Gusto mong matest Mojo?

Dumaan ka sa Divisoria, Soler, Ongpin, Recto, Reina Regente, Tomas Mapua, etc. during Rush Hour Saturday afternoon in X-Mas season.

Kulang yan ILD... and sakin test road ay Juan Luna from Plaza Lorenzo to recto... REcto Ave. from Elcano to SOler/ Dagupan.. and Ilaya, M.D. Santos beside Divisoria Mall... dito maputakti ang mga sidecar... tingnan lang natin ang lupit ng ride mo dito...

WBR,

**ILuvDetailing** · March 29th, 2005 04:08 PM

Originally Posted by Innova_Boy

Kulang yan ILD... and sakin test road ay Juan Luna from Plaza Lorenzo to recto... REcto Ave. from Elcano to SOler/ Dagupan.. and Ilaya, M.D. Santos beside Divisoria Mall... dito maputakti ang mga sidecar... tingnan lang natin ang lupit ng ride mo dito...

WBR,

I wouldn't even dare bring my car to DM, roads are narrow, lots of people, lots of sidecars, hirap ng parking, and oh... traffic. When I go there, I just park at one of the pay parking lots, ok na mag bayad for parking kesa madale ng mga sidecar or tao. Kahit may bullbars ka front and back, your side is still exposed, really there's not fool proof way of avoiding dents when you go to those areas. Kahit naka bullbar ka kung tinamaan yan its still an eyesore. worse case scenario eh tumabinigi yung bullbar mo.

**5Speed** · March 29th, 2005 04:20 PM

hehehe dapat pala eh tangke dala mo dyan...hehehe magasgasan man eh ok lang ....

**Mojo** · March 29th, 2005 06:18 PM

IluvDetailing,

naka tira ako sa Recto, and pass by the streets you mentions almost daily, xmas season i try ko hahahaha.

Quicksie

anyway Yung bullbar kasi yung design is yung may front guard, yung parang arko, pag bumanga ka nun, talaga damay hood mo, yung design na practical is like a metal bar convering your bumper, wala yung parang arko. pag na banga ka, sa gusto mo hindi tatamaan bumper mo with or without a bullbar.