malakas ang ingay pag-sara ng pinto

[amacatan]

ano kaya pwede ko gawin para tahimik ulit pag sinasara yung pinto nung sasakyan namin (revo gl 2000)? yung sa front lang medyo malakas ang kalampag pag sinasara e. tahimik pa naman isara yung sa likod kasi bihira naman mabukas-sara kasi bihira may sumakay sa likod.

kumbaga kung dati e ganito ang tunog nung pagsara ng pinto "thug", ngayon e "brag".

kuha nyo? hehe.

[quindoyos]

lagyan ng wd40 yung hinges and lock mechanism?

[flakez]

tama, wd40 lang katapat niyan.

[amacatan]

wala naman problema sa hinges e. iniisip ko na baka worn out na yung rubber sa paligid ng pinto kaya maingay yung pagsara e. wala na siguro gaano cushion dun sa rubber kaya malakas pag sara ng pinto.

pero sige try ko lagyan wd40 yung lock mechanism mamaya.

[afrasay]

baka wornout na yun plastic molding na tinatamaan ng striker. balutan mo ng electrical tape.

[salev]

mga ser buhayin ko sinulid na to pano nga ba mapapabalik yung dating tunog brandnew na pagsasara ng pinto? maingay na kasi passenger and driver side door ng adventure namin eh lalo na pag nakababa ang windows, parang mababasag na salamin ang tunog. TIA

[Syuryuken]

Ba pareho tayo pag sinasara yung pintua parang may nababasag na salamin.

[BeetOls]

Sirs, try nyo po palitan ang mga rubber stoppers, mine improved a lot after doing so. maganda at firm ang tunog. baka pudpod na yung sa inyo.

HTH

[Syuryuken]

Ok bro ayusin ko nga mamaya nakakairita kasi. thanks.

[basti08]

if you cant find rubber stoppers...try what im doing...

gamit lang ay isang hose that you can buy in petshops yung ginagamit sa oxygen ng aquarium...yung transparent and maliit lang ang lumen nya.
at isang electrical tape.

what i do, pinuputol ko yung hose about the same length as the door catcher yung kinakapitan ng lock ng door. then ill cut it in the middle para the hose can hug the metal of the stopper. then wrap it with electrical tape so it wouldnt fall.

voila! ok na tunog ng pinto ko.

[jdab]

Hmm.. Could it be the long metal bar placed horizontally inside the door panel? I also have this problem and found out only the other day what's the cause. The long metal tube inside the door panel is mounted by a 'rubber-ish' or bubble gum-like material to the outer layer of the door panel. When the door closes, you can clearly see and hear the outer door layer banging to the horizontal bar.

Would anyone know where can we go to have this fixed?

My car by the way is a Civic ES.

[normanenoza]

worn door hinges could be the culprit.

[niky]

Hmm.. Could it be the long metal bar placed horizontally inside the door panel? I also have this problem and found out only the other day what's the cause. The long metal tube inside the door panel is mounted by a 'rubber-ish' or bubble gum-like material to the outer layer of the door panel. When the door closes, you can clearly see and hear the outer door layer banging to the horizontal bar.

Would anyone know where can we go to have this fixed?

My car by the way is a Civic ES.

Hmmm... not sure, pero I suppose any body shop can do the work if you explain what you want. That rubber-ish material sounds like rubber epoxy... not hard to find.

[KrisKros]

Maybe you can sound deaden your doors. The difference between a BMW's door closing and a Corolla's door closing is different talaga. A BMW's door uses more material..sound deadening material. That's why they have a quieter ride than most cars. So sound deadening I think can help. Unless you have loose screws inside ur door that makes that sound u dont want.

[wrcastro_ph]

Siguro parang silicon sealant lang nakalagay in between. pero medyo malayo ang space ng horizontal bar dun mismo sa door sidings. di dapat sya tatama. dun po sir sa mga nagpipintura kotse alam nila siguro solution dyan.

Minsan kasi yan may maluwag lang sa loob and ussually ay yung holder ng glass windows mismo.

[umzzzzz]

Ba pareho tayo pag sinasara yung pintua parang may nababasag na salamin.

kung naka roll down ang bintana habang sinasara ang pinto, baka ung locking mechanism sa loob e loose, kaya pumapalo sa salamin??? ganun kasi sa hatchback.

[afrasay]

that horizontal bar is the side impact beam. it should not move. ok yun sinabi ni basti08.

[afrasay]

re sa windows eh try to replace the channels they could be worn out already.