Buttons on the Car Stereo's Faceplate don't work anymore

**goldencoil** · June 13th, 2005 10:30 AM

Hi Guys,

Hingi lang ako nang advice sa inyo.

Yung Pioneer na Car Stereo ko kasi ayaw na gumana yung mga buttons. Kahit anong pindot ko sa mga buttons like Volume Control, FM Station selection eh ayaw na nyang mag respond.

Iniisip ko eh katulad din ito nang mga normal problems sa lumang TV remote controls na nawawala na yung contact nya sa loob. Carbon ata yung tawag nila dun. Nde ko naman kasi masabing sira yung electronics nya sa loob kasi may mga ibang buttons na gumagana pa rin at minsan, natya tyambahan kong mapagana yung mga buttons na may problem.

I am thinking of bringing this unit para malagyan nang Carbon sa raon pero I'm thinking of a way na kahit ako na lang ang gagawa para maayos.

Meron ba kayong alam nabibili na bagay para ma "re-carbon" yung contacts?

May nagsabi sa akin na pwede ko daw sulatan nang lapis yung nawalang carbon. Oks ba to?

I would appreciate your comments guys.

Thanks!

**BlueBimmer** · June 13th, 2005 10:34 AM

bring it to a pioneer service center to be sure at para solve problema mo. mahirap na yang sariling kalikot baka di rin tumagal yan.

**Innova_Boy** · June 13th, 2005 10:47 AM

Yes, puede rin ang pencil on the contacts, but IMHO di rin tatagal yan kasi once na maupos yung pencil na kiniskis mo sa contacts, pag naubos eh no contacts na naman yan... better have it repaired professioanlly para di pabalik-balik ang problema...

WBR,

**goldencoil** · June 13th, 2005 10:59 AM

BlueBimmer and InnovaBoy, thanks for the input. I guess bringing it to the service center is the wisest thing to do. Thanks for the input.

Btw, ano ba ibig sabihin nang IMHO? Newbie kasi ako eh.

**BlueBimmer** · June 13th, 2005 11:01 AM

imho - in my humble opinion

**yebo** · June 13th, 2005 11:12 AM

kung yung keys ay yung rubber type with graphite inserts, minsan madumi lang yung contacts. parang cel phone or keyboard keys din yan. open it, then clean with contact cleaner.

pag hindi makuha sa linis dikitan mo ng aluminum foil. gupit ka small circles ng foil (same size ng contact sa ilalim ng key) then dikit mo dun sa ilalim ng individual keys using contact cement (rugby). make sure you smoothen out the edges of the foil so there will be no false contacts, meaning baka kasi mag-contact even though dehins mo naman pindot.

pero pag yung keys ay sealed, service center na talaga.

**BoEinG_747** · June 13th, 2005 11:24 AM

Originally Posted by BlueBimmer

bring it to a pioneer service center to be sure at para solve problema mo. mahirap na yang sariling kalikot baka di rin tumagal yan.

,,yup ...sir blue bimmer is right better bring it to the service center or to the expert ..baka iyon tinitipid mo na cash ..pag lumaki sira mas malaki pa ang gastos ...

tama rin si sir innova boy.. remedy lang iyon carbon ng pencil at hindi solution babalik din iyon someday na loose contact if ever sa circuit board ang sira saka d pa naman sure na iyon ang sira baka meron pa na iba ..IMHO