The Nissan Frontier Thread

**vinj** · June 26th, 2006 08:53 AM

Originally Posted by jvandanne

tanong ko lang mga frontier friends, madali ba i-start ang td32 engines nyo?

pansin ko lang parang hirap magstart kapag malamig kaya binobomba ko pa yung gas.

talaga bang ganun? yung iba kasi oneclick start lang, sa frontier, medyo mahirap i-start kapag malamig

Could be the engine is in need of a check-up already (fuel system or the glow plugs); both the TD27 and QD32 start up on one click after the plug light turns off usually.

The 4x4 a/t models (first gen) would go for as low as 450K if it's in not-so-good condition to a high of around 525K or so nowadays IMO.

**jvandanne** · July 5th, 2006 08:05 PM

Originally Posted by vinj

Could be the engine is in need of a check-up already (fuel system or the glow plugs); both the TD27 and QD32 start up on one click after the plug light turns off usually.

how do i confirm that its indeed the glow plug that needs changing? any inspection i can do or someone to check it for me?

and any idea how much it would cost just in case it needs changing?

thanks for the input

**Lemon** · July 6th, 2006 01:24 AM

Originally Posted by jvandanne

san ba nakakabili nyan? or home made ba yan? ganda

Bro I got it courtesy of my US based sister. She bought it from eBay. Here's the seller : http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWA%3AVRI

Balak ko din magpabili ng bed cover, problema ay shipping. Masyado malaki yun item.
http://cgi.ebay.com/ebaymotors/TRUXE...QQcmdZViewItem

**quiksie** · July 6th, 2006 10:09 PM

lemon dito ka nalang bumili sa pinas dami diyan brands na mga roller up. Pwede carryboy, pace edwards at gatorcab at iba pa. Baka mas makamura ka pa kung dito ka bibili. Yun billet grille alam ko may nagfabricate dito niyan, not sure.

**jvandanne** · July 11th, 2006 08:42 PM

Originally Posted by jvandanne

tanong ko lang mga frontier friends, madali ba i-start ang td32 engines nyo?

pansin ko lang parang hirap magstart kapag malamig kaya binobomba ko pa yung gas.

talaga bang ganun? yung iba kasi oneclick start lang, sa frontier, medyo mahirap i-start kapag malamig

nasolve ko na sarili kong problema. battery problem na pla.

**gonzo** · August 7th, 2006 06:07 AM

I need to change my front brake pads, ang sabi ng Taga caltex na technician kailangan na daw e pa re-face ang rotor disc ko kasi rough na sya.. pero sabi naman sa akin ng taga nissan na casa ok pa daw un??.... Just want to make sure kasi napaka mahal ng brake pads ng frontier baka mabilis ma ubos pag di sya smooth.. mga sir ano po ba ang basis na kailangan na e pa re-face para mag smooth ulit ang rotor dics?? thanks

**jvandanne** · September 21st, 2006 10:57 AM

Originally Posted by wildthing

LIFTING RIDE HEIGHT (low budget style)
baka alam nyo na (pero para na lang ito sa mga hindi familiar)...yun standard na fronty can be adjusted pa ang height by an inch through the T-bar adjustment para tumaas ng kaunti sa harap...yung likod bili ka ng new shackles na mahaba ng 1.5" ang space ng butas. COST OF LIFTING THIS WAY P300-1500 - price ng new shackles and labor for Tbar adjusment

dati.

any suggestion where i can acquire yung parts na kailangan ko for this? balak ko kasi bilhin na lang at pakabit sa trusted mechanic namin.

**Lemon** · September 21st, 2006 11:15 AM

^^ You can get the shackle sa mga auto supply. 300+pesos para sa set.

**katsudon_ph** · September 21st, 2006 11:53 AM

d kaya madaling maputol torsion bar dahil sa adjustment?

**ARB** · September 21st, 2006 01:03 PM

the 300 peso shackles are they the generic ones with lots of holes? if yes, I strongly advise to stay away from them. They are a cheap lift alternative but they will not be in the long run. I have i think mentioned this in this thread before.