Results 1 to 4 of 4
-
October 8th, 2003 09:32 PM #1
Does anyone know the maximum allowed thickness for the disc (ROTOR DISC) sa rear of the Gen1 Paj (Subic Japan)?
Medyo nag stuck up breaks ko and worst is the pads got worn out. Nag bakal sa bakal......
Dinala sa machine shop and i'm worried medyo manipis na...
Also anyone know where i can buy brand new or surplus discs? Thanks!
-
October 8th, 2003 10:41 PM #2
The minimum rotor thickness should be stamped somewhere on the rotor itself.
You can probably get brand new rotors from MitParts in banawe or even the Mitsu dealer. It would be probably better to bring the rotor itself because most shops will turn you down when they hear the word 'converted'.
http://docotep.multiply.com/
Need an Ambulance? We sell Zic Brand Oils and Lubricants. Please PM me.
-
October 9th, 2003 01:48 AM #3
alin ba ang manipis yun rotor or the pads. if pads lang bring the pads with you when you buy. if rotor, medyo madugo yan, surplus ang best bet mo.
-
October 9th, 2003 10:58 AM #4
Rotor eh....dinala ko na yung Rotor sa El Dorado wala daw sila. Yung pang Gen2 Local Intercooler maliit.
My Diff is LSD ...dont know if thats the reason my disc is different. Anyway mukhang surplus ang hahanapin ko.
Kailangan mapagawa...gusto ko pa naman sumama sa High Peak
Thanks OTEP and AFRASAY!
Buhay na buhay ang BGC this evening. Bukas halos lahat ng restaurants. Sabi pa nung isang cashier...
Traffic!