New Mitsubishi Strada [ARCHIVED]

[apollo_kafka]

if you are really after the Montero Sport, may i suggest the 3.2 GLS 4x4? i will PM you the reason why upon your request...

Why Sir?

[Pol-pol]

my insurance has free etching. anyhow, it says P1000 for four.



you can also opt to buy the side mirror protector, as it is glued to your side mirror. sir boy25 has that.



ayan na sir..three officer have greeted you and two members. welcome sir.

for the glass etching..i think big berts also does this.

inaayos ko lang link ng pic mo sir so people can see your ride.

Thank you mga sirs.

Residence in Sucat, office in Makati but often seen all over Metro Manila.

The wheels are 16x8. Was not aware that there is a 16x7 set. Will try to post a front view photo, possibly with the help of sir av8or5.

[dadz]

just in case you want this, i have a box na papadala diyan next friday eto yung available na bash plate tested na gamit nag mga bro natin sa malaysia,singapore,autralia at europe.

around 3 or 4 mm ang kapal nya medyo mabigay siya. if some one like this sasabay ko sa shipment next friday. yung price post ko later kasi tatawagan ko pa hehehehehehe

[mdksael]

Bro yung bash plate meron makukuha dito 4mm siya but hindi ganyan na walang butas yung nandito meron butas and only one pc bash plate lang yung front diff cover wala po, yung roll bar na yan tol masyadong malaki hindi ma tatago sa customs hehehehehehehehe but me design ako na bash plate and front diff cover na maganda me sukat if you guys know some one na me machine shop na magagawa nila pagawa na lang tayo diyan sarili nating design.

mga sirs, i am also interested sa bash plate at front cover, me machine shop ako yan ang line ko ss and any metal fabrication, just contact me if nandito na si sir dadz and titingnan naten kung anu ang magagawa naten jan....gusto ko din kabitan si azul nyan, actually matagal ko na sinisipat yun aking azul kung anu bash plate design gagawin ko jan, naisip ko na ss chekered plate na 4.7mm ang thk na bubutasan ko for ventilation, kaya lang baka mabibigatan ang truck naten, anyway tingnan muna naten yun design ni sir dadz kung kaya ko gawen. good day guyssss

[ThePatriarch]

mga sirs, i am also interested sa bash plate at front cover, me machine shop ako yan ang line ko ss and any metal fabrication, just contact me if nandito na si sir dadz and titingnan naten kung anu ang magagawa naten jan....gusto ko din kabitan si azul nyan, actually matagal ko na sinisipat yun aking azul kung anu bash plate design gagawin ko jan, naisip ko na ss chekered plate na 4.7mm ang thk na bubutasan ko for ventilation, kaya lang baka mabibigatan ang truck naten, anyway tingnan muna naten yun design ni sir dadz kung kaya ko gawen. good day guyssss

uy ok yan bro sael... baka umorder ako nyan sa iyo, hehehe

OT: punta ka ba mamya sa mini EB? 8 pm sa The Alley Bar, Ortigas Home Depot compound Ortigas Center, Pasig City... discuss natin Enchanted Kingdom EB

[nismo26]

just in case you want this, i have a box na papadala diyan next friday eto yung available na bash plate tested na gamit nag mga bro natin sa malaysia,singapore,autralia at europe.

around 3 or 4 mm ang kapal nya medyo mabigay siya. if some one like this sasabay ko sa shipment next friday. yung price post ko later kasi tatawagan ko pa hehehehehehe

i like this one sir dadz... order po ako....

[dadz]

Actually mga bro it is called bash plate or skid plate depende kung saan ka hehehehehehe minsan engine under cover but all have the same idea.

Try ko post dito yung design galing yan sa bro natin sa australia pina send ko lang sa email ko.
PM nyo na lang sa akin email add nyo kasi hindi ma post yung design .

[RedHorse]

dadz,

i pmed you, re: skid plates thanks

[dadz]

Guys i already send the design nag bash plate or skid plate with the front diff cover din kung sino pa me gusto nag design just PM with your email add baka kasi masmura kung diyan gagawin kesa dito but kung mahal siya you can order the pics na ka post but the price i will know kung mag kano sa monday i have a meeting with the maker kasi full set kukunin ko sa kanya (bash plate, fuel tank cover, transfer case cover and rear diff cover)

[G01]

Guys i already send the design nag bash plate or skid plate with the front diff cover din kung sino pa me gusto nag design just PM with your email add baka kasi masmura kung diyan gagawin kesa dito but kung mahal siya you can order the pics na ka post but the price i will know kung mag kano sa monday i have a meeting with the maker kasi full set kukunin ko sa kanya (bash plate, fuel tank cover, transfer case cover and rear diff cover)

Bro Dadz, please pm me also the prices ng mga bash and skid plates pag nakuha mo na prices this Monday. Sama mo na rin bro yung 3" lift kit. Thanks.