Results 2,371 to 2,380 of 3921
-
February 3rd, 2015 06:19 PM #2371
thanks sir
tint, seat cover lang walang masyadong freebies cash kasi.
- - - - - - - - - - - - - - - - - - - - - -
thanks sir
tint, seat cover lang walang masyadong freebies cash kasi.
-
February 3rd, 2015 06:20 PM #2372
-
Verified Tsikot Member
- Join Date
- Feb 2014
- Posts
- 8
February 3rd, 2015 06:30 PM #2373newbie here, mga sir may nag pa pms naba dito outside casa na under warranty pa ang monty? any feedback?
-
February 3rd, 2015 09:21 PM #2374
-
February 3rd, 2015 10:39 PM #2375
-
February 4th, 2015 12:53 AM #2376
Sabi sakin wala na daw gray haha. Yan pa naman gusto ko sana.
Last edited by emachine; February 4th, 2015 at 12:57 AM.
-
Tsikot Member Rank 1
- Join Date
- Jul 2009
- Posts
- 4,090
-
February 4th, 2015 07:46 PM #2378
-
February 4th, 2015 08:10 PM #2379
XCOPY source [destination]
1) Be sure you have 2 SD Card Reader one is the source and the other is the target (destination) like the one below.
Take note of the assigned drive of the SD Card reader your computer will assign to both card readers and where you will place the original (source) SD Card and the one you want to copy to (Destination)
2) Using Windows invoke a command prompt (cmd) ; one way of doing this is to open the window task manager then File -> New Task (Run) ; Window will pop out (Create New Task) -> then type CMD then press ENTER
3) At the command prompt type in the command
xcopy source [Destination] /H /I /C /K /E /R /Y
> then press Enter
eg. xcopy e:\ f:\ /H /I /C /K /E /R /Y
Where in
a) e:\ is the source (the one SD Card you are copying from)
b) f:\ is the destination (the other SD Card you want to copy to)
-end-
- - - - - - - - - - - - - - - - - - - - - -
XCOPY source [destination]
1) Be sure you have 2 SD Card Reader one is the source and the other is the target (destination) like the one below.
Take note of the assigned drive of the SD Card reader your computer will assign to both card readers and where you will place the original (source) SD Card and the one you want to copy to (Destination)
2) Using Windows invoke a command prompt (cmd) ; one way of doing this is to open the window task manager then File -> New Task (Run) ; Window will pop out (Create New Task) -> then type CMD then press ENTER
3) At the command prompt type in the command
xcopy source [Destination] /H /I /C /K /E /R /Y
> then press Enter
eg. xcopy e:\ f:\ /H /I /C /K /E /R /Y
Where in
a) e:\ is the source (the one SD Card you are copying from)
b) f:\ is the destination (the other SD Card you want to copy to)
-end-
-
Kwento ng katrabaho ko, meron daw sya officemate dati na Italiano na tinanong daw bakit...
Traffic!