Mitsubishi Pajero Fieldmaster (Gen 2.5) [ARCHIVED]

[razor360]

actually sir ganon ang ginawa ko last time..jinack ko ang auto ko, tapos inikot ang gulong. may naririnig akong parang mga basag na bearings. tapos nag lolock na para yatang may mga naiipit sa gears. sir saan ko kaya pedeng makita ung sinasabi mo? para kahit ako na lang ang magkalas.

[promdiboy]

razor360, bearing needs to be machine pressed.

[testament11]

di ako masyado sure pero kelangan mo kasi mailabas ang shafting niyan. alisin mo gulong at yun rotor disk

[ar24458]

guys,

i need to change my signal light and park light bulbs....i cant seem to find any area where i can dismantle the signal/park lights under the hood to replace the bulbs. any tips from you guys?


thanks

[pajeri20]

guys,

i need to change my signal light and park light bulbs....i cant seem to find any area where i can dismantle the signal/park lights under the hood to replace the bulbs. any tips from you guys?


thanks

open the hood of the car then look for the screw in the inner side of the park light 1 screw lang yun then pwede ng hugutin ung park light assembly

[pajeri20]

open the hood of the car then look for the screw in the inner side of the park light 1 screw lang yun then pwede ng hugutin ung park light assembly

ung screw sa gawing ibabaw ng headlight nag iisa lang un

[ar24458]

ung screw sa gawing ibabaw ng headlight nag iisa lang un

not sure if the one i saw and removed is the one you're saying...but di ko mahatak yung parklight assembly...how should i pull it? sideways? just straight backward away from the hood?

[promdiboy]

ar, sa FM may spring yan with a hook sa other end. nasa likod siya ng fender wall, may parang alambre na kulay faded green, unhook mo muna yun, yung sa driver side kailangan mo angatin yung coolant reservoir tank para makita yung hook. usually naninikit yung parklight sa katawan. ang pwede mo gawin para di magasgasan is yung gap sa baba ng parklights sungkitin po pataas ng flat screw, .

[promdiboy]

sorry double post

[kenzie]

EAST paj owners ....

first of pasensya na po at hindi naka attend sa PDP EB sa marcos hiway ... babang luksa po ng aking mahal na grandma kaya medyo may kaunting padasal ng araw na iyon .....


help po, sino po sa inyo ang may recommended na mechanic sa east area na pdeng mag adjust ng idling ng ating sasakyan yung pong medyo malupit kapag dating sa pajero .... mababa ang idling ng sa akin kaya medyo magaralgal ang timpla ng aking 4D56 engine any tips po is greatly appreciated ....

happy holidays po sa lahat