LANCER Itlog (93-96) Owners - Please Post Here!

[Onads]

Hi to all,

First of all, dko alam kung nasa tamang thread itong issue ko. Newbie lang ka register lng. hehe

Gusto ko lang po sana mag tanong about sa PCD ng lancer 94 Gli? Currently my brother bought a PDW rims in a certain website which is nagustuhan ko din ung looks. Since newbie lang kami about cars wala pa kmi masyado alam pag dating sa ganyan. So going back, yung mags naka stock muna sa bahay at nag hanap pa din brother ko magandang gulong para dito. I suggested 195/50/15 kahit WESTLAKE, WANLI or Neuton tires will do. According na dn sa mga nag suggest. Pero when I was looking sa mga reviews, forums (mitsulancerph.net) ang PCD ng 94-96 lancer is 114? Kindly correct me if I am wrong. I am wondering ngayn kung magkakasya yung PDW mags na nabili namn (Nsa abroad kasi ko kya dko maasikaso personally) As per the seller info about dun sa mags:

15'' alloy wheels
PCD 100
6.5 width
38 offset

As I've check PDW mags is made from Australia and I think most of the PDW rims is 100/105-108 lng ata ang PCD. Ok sana kung 100/114 PCD malaki tlga chance pumasok sa lancer ko (kung tlgang 114 ang lancer). Kung ang spec ng rims is 100/114 usually 8 holes sila d po b? Kindly inform me namn kung pede to sakin. I also noticed that the 1st 4 holes is different from other 4. I think dito na ung sinasabing 100/114 or 100/105-108. Parang kelangan ko ata motivation.. lol



Many thanks in advance.

[marvin22]

Quoting from Page 11.

Mga bossing,

As requested by Mang Roman, here are his updated contact numbers:

PLDT Landline: 641-4523
CP: 0927-853-1800

More power Tsikot.com!

--------------

Hello Guys!

Ok na Glxi ko, problem was detected by Mang Roman and its now back to normal!!!
No problem with the tranny, we found out that despite the new servo kit, there was a 'by-pass' conversion (toyotal idle) up hiding under it that doesn't seemed to correct the problem. Mang Roman removed it and put it back to its original setup. He doesn't recommend conversion as the problem will still be in the system so balik sa stock pati electricals (may prob rin yung socket ng servo supply so ni-replace rin). May isa lang kami na discover, may nagnakaw ng gears at magnetic ng servo ko!! siguro yung nag-convert, ginahasa yung laman kasi nakita nya bago pa!... hinawakan na ni Mang Francis yung kotse ko prior to that pero hindi ko sya pinagbibintangan----medyo lang hehe.
Anyway, had no choice but to replace the gears and magnetics inside which costs me P1500. Pinalitan yung spark plugs, inayos yung angle ng distributor, ni re-wire yung servo supply and other wirings (including tachometer), at presto! naayos na rin ang prob ng kotse ko....!..total parts replaced costs me P1900, plus P1500 (very sulit) na labor cost.
Then he rest the computer several times to ensure wala na lalabas na error.

Maayos na ngayon, although I know na sooner or later babalik prob sa servo due to the fact na replacement gears lang inilagay dun, at least alam ko na na yun lang ang prob at gumagana na yung servo ko.

Thanks guys sa mga suggestions at recommendations nyo!!! Merry xMas!!

Ngapala may request si Mang Roman, ito na lang daw number na ito gamitin nyo at i-post kung pwede:

[SIZE=5]09212474805[/SIZE]
[SIZE=5]Look for Richard[/SIZE]

Sya yung in-charge dun sa Shop--brother ni Mang Roman, for a very personal reason according to Mang Roman i-course thru na lang daw sa number na yan ang inquiries at appointments pero sya pa rin daw ang gagawa.

Thanks ulit!!

[OptimusKyo]

mga sir, tanong ko kung magpapa-wheel balance ako, mada-diagnose ba kung anong speed malalaman kung magkakaroon ng vibration o wiggle sa gulong?

[Chronos09]

ako din may itlog

[chiekot]

Hi itlogers, nakabili ako lately ng EL '94 model. Okey pa naman manakbo kaya lang ay lakas lumamon ng gas. Considering na 1300 lang ang makina ay mas matipid pa ang Toyota Revo na 1800. Maayos kaya ito kung pa-overhaul ko ang carb? I already went to Kamuning at isang shop dun ang nagsabi hindi rin daw siya sure kung titipid nga ang consumo kung pa-overhaul ang carb.

May ganito na ba kayong experience sa mga itlog nyo?

[Chronos09]

Hi itlogers, nakabili ako lately ng EL '94 model. Okey pa naman manakbo kaya lang ay lakas lumamon ng gas. Considering na 1300 lang ang makina ay mas matipid pa ang Toyota Revo na 1800. Maayos kaya ito kung pa-overhaul ko ang carb? I already went to Kamuning at isang shop dun ang nagsabi hindi rin daw siya sure kung titipid nga ang consumo kung pa-overhaul ang carb.

May ganito na ba kayong experience sa mga itlog nyo?

ganyan din yung nabili ko paps... glxi 93 model 1.6L... 4km/L... pinaayos ko yung servo.. (sabi ng nag-ayos, servo lang daw may singaw eh).. pero di ko pa ulit na-test yung FC... update kita kapag na-test ko na... XD

[myk384]

Hmmm..... Pwede ba ang parts ng Mitsubishi Lancer itlog sa Proton Wira?? Considering nakabase ang Proton sa Itlog.

Diba pareho yung parts nun??

Curious lang?? Hehehhe

[marusame07]

hey co-itlog owners, i have a 95 gl lancer, please i am a die hard mechanic na wlang alam, ask ko lng po, may screeching sound po sa left front wheel ko kpg umaakyat n ung speed ko ng mga 30, mas noticeable po ung screech kpag hndi nkakagat ang gear tpos hndi ako nakatapak sa gas, pag nirelease ko ung gear (neutral) nwawala ung screech, suspected ko brake pads ko n un, or am i wrong? PLEASE GIVE ME AN ADVICE HOW TO FIX IT. THANKS CO ITLOG OWNERS.

[InnO_04]

Hello mga ka-Itlog! Tagal ko di naka-pag online dito ah... Kamusta po kayong lahat!

[InnO_04]

hey co-itlog owners, i have a 95 gl lancer, please i am a die hard mechanic na wlang alam, ask ko lng po, may screeching sound po sa left front wheel ko kpg umaakyat n ung speed ko ng mga 30, mas noticeable po ung screech kpag hndi nkakagat ang gear tpos hndi ako nakatapak sa gas, pag nirelease ko ung gear (neutral) nwawala ung screech, suspected ko brake pads ko n un, or am i wrong? PLEASE GIVE ME AN ADVICE HOW TO FIX IT. THANKS CO ITLOG OWNERS.

Try mo pa check yung rotors o kaya calipers baka sumasabit.. Pa-check mo din alignment.