LANCER Itlog (93-96) Owners - Please Post Here!

**mastertee** · July 22nd, 2009 12:18 PM

hi guys bago lang ako sa forum na to.. naghahanap ako ng second car to buy, tapos sabi nung kaibigan ko na "itlog" owner ito daw yung bilhin kong model.. kaya ako napadpad sa forum na to. . . can anyone help me decide kung anong "itlog" year model ba ang magandang i-modify.

salamat ng marami ...

**1D4LV** · July 22nd, 2009 01:11 PM

actually, lahat masarap imodify. maski EL pa sya.
pero, imho, engine wise and functionalities, GLXi na.

**mastertee** · July 22nd, 2009 02:28 PM

Originally Posted by 1D4LV

actually, lahat masarap imodify. maski EL pa sya.
pero, imho, engine wise and functionalities, GLXi na.

sir sensya na ha di ko kasi kabisado tung lancer . . . anong year ba ng GLXi ang magaganda ang features ng engine?

Salamat..

**delltek04** · July 24th, 2009 03:28 AM

question ulit mga itlogers..

i was supposed to have wheel alignment and camber correction yesterday, but the tech said that height in my front are not the same (front-left side is 1 inch lower).

what can be the cause? and what's the fix for this?

**1D4LV** · July 24th, 2009 07:30 AM

^are you using stock springs? putol springs? lowering springs?

if you are using stock springs, probably malambot na.
kung putol springs, malamang di pantay ang putol.

or probably busted shocks.

**zoomfx707** · July 24th, 2009 08:49 AM

Originally Posted by 16CM32

Count me in. EL 95 from tanauan batangas. Sa mga kababayan ko, alah eh musta mga itlog nyow. Naghahanap pala ako ng Libero bumper baka may alam kayow ...hehehehe Mabuhay tayong lahat at alagaan natin ang mga itlog natin...

cp 09266993633

si boyet rin ata ikaw eh.. kung taga batangas ka, meron mga itlog dito..
http://www.mitsulancerph.net/yabb2/Y...=1160976640/15

**nivlax** · July 29th, 2009 06:32 PM

Hi! newbie here. got my lancer 96el last month lang. kotse ng boss ko, e nagpalit na siya ng car kaya binili ko na. hehehe.

Anyway, last weekend binayahe ko siya ng batangas, medyo maganda kasi yung kalsada sa expressway kaya medyo nabatak ko ng konti (around 120 - 130kph). wala naman akong naramdamang problema during my ride. pagdating ko sa bahay, chineck ko ung makina, napansin ko na may stains of oil under the hood, sa may right side. tinanong ko sa mekaniko dun sa amin and sabi nya sa aircon compressor daw yung tagas.

tanong ko lng, may kinalaman ba yung pagbatak ko sa expressway sa leak sa compressor (kung yon nga yung problem)? or meron pa kayang ibang cause yung leak? thanks in advance. more power!

**yujin35** · July 30th, 2009 10:05 AM

hi to all itlog users mine is 94 glxi favor naman baka makatulong kau d makaarangkada un itlog ko pang me bumabara pag hinahataw ko alam nyon parang sinisinok pano kaya yun last 3 mos kapapalt kolang nun cerbo
hope you all can help me to maintain my itlog tnx

**yujin35** · July 30th, 2009 10:09 AM

hi mahal ba sila sumingil pls repy nid to fix my itlog talaga wat exact address cruven cubao

**yujin35** · July 30th, 2009 12:28 PM

Originally Posted by zoomfx707

bypass servo mo? check mo nalang dude post ko before this post.. sa mga taga batangas na itlog.. more power stin.. itlog rules.. wakokoko..

Originally Posted by kizmark

*^^Ajaj^^: have tried cruven (ung malapit sa crame) on my 93 itlog. di ka magsisisi. binaklas nila lahat ng pinagsususpetsahang panggagalingan ng kalampag (grabeng napabayaan ko ang itlog ko, over 1 year na kumakalampag) and after a day's work, parang brand new na ang feel ko sa ride. kakausapin ka nila kung alin ang puwedeng remedyuhan at alin ang kelangang palitan. remedyo would mean changing an original but worn out bushing with something fabricated from a truck tire, and they're good at it.

yujin35 hi hav a problem with my itlog pumapalya pag paakyat bumababa ang rpm nagpalit nako ng clutch,distributor, cerbo pero ganun padin can u reccomend me na magling d2 kaya ba ng cruven un ganitong problem hope to hear from all of you nid q suggestion badly tnx