Cranking up the boost on the 4D56TDIC

**marwen** · August 21st, 2003 12:01 PM

Originally posted by altec
marwen, take note stainless yung washers ko, not the ordinary ones. Stainless is thinner than the g.i. washers. Pajerokid, yung akin over 3 years na ang oto with me. Ganun talaga! My friend had the same model (96) di ganun kalayo, although better sa kanya a little. What's a drop in filter?

teka..teka... may sinabi ba akong ordinary and hindi stainless ang washers mo as far as i remember sabi ko lang 4 din ang washers ko...

peace po

**altec** · August 22nd, 2003 12:53 AM

marwen, I wasn't saying anything defensive, as if trying to justify stainless washers ko na parang nagpapayabang ako. In this thread, the guys mentioned 2 kinds of washers, yung g.i., at yung stainless. There is a big difference between the two in terms of THICKNESS. So adding 5 stainless, as stated in this thread, would have the same thickness with a difference of .5mm sa 3 pieces g.i. Walang ka connection yan kung stainless o hindi. Pare, the cost between stainless at g.i. we are talking of 10 PESOS or so lang per piece so di yan pagyayabang. Info yung sa akin coz yung kay pajerokid, 3 G.I. washers ang ginamit niya. The others mentioned with 4 washers were also G.I. washers, so thicker ang setting nila.

**altec** · August 22nd, 2003 01:04 AM

difference of .5 mm sa 4 pieces g.i. 4 stainless was slightly thicker than 3 g.i. when I measured it.

AC · April 5th, 2004 02:32 AM

sirs... i just found this thread.. hehe.. so 4 gi washers? and a bolt? ano po size ng bolt na kailangan ko? can the bolt also be bought in any hardwares? gusto ko din mods nyo... hehe... pics naman po.. pls? u can post here or sa email ko... alvincochua*hotmail.com tnx

**pajerokid** · April 5th, 2004 08:49 AM

haaay. if only i can find the wastegate actuator on the 4M40. Reading through this tread bring back a lot of great memories (sob,sob,sniff,sniff)

**luckytruck** · April 5th, 2004 10:41 AM

pajerokid, i have a friend who owns a mitsu delaer here and he has the 4m40 as well, do you want me to ask him to look for the wastegate actuator?

andy

**pajerokid** · April 5th, 2004 11:19 AM

Sure

**luckytruck** · April 5th, 2004 12:31 PM

cge pare, ipahanap ko.

andy

**Yellow** · April 5th, 2004 11:56 PM

Abah na buhay ulit ang thread na to! hehehe.

pajerokid,

Yung wastgate actuator ng 4M40 naka tagilid, bale halos horizontal sya sa ground, nasa may left side sya pag naka harap ka sa front ng engine, halos the same position ng wastgate actuator ng 4D56. Di lang ako sure kung paano lagyan g washers, I'll check tom, may benta kaming 4M40 engine na pajero.