What Are You Thinking About?

[ninjababez]

^
pag redundant na eh tago mo na lang pera mo.

malaki din kasi difference pag mig vs stick welding
sa jack naman, convenient and safer yun malaking jacks

Sent from my Redmi Note 9 Pro using Tapatalk

[papi smith]

Ang mig ba bro, pwede kahit saan? Kasi nakita ko nung ginamitan ng tig ang stainless rails ko, walang kalat ng spark

Edit: nag google na ko bro, mas ok pala sya

[Vodka]

ano kaya bilihin ko ..

inverter mig welding machine, kahit meron nako inverter stick welding machine ..

or

floor jack na 500mm, kahit meron nako 325mm



Sent from my Redmi Note 9 Pro using Tapatalk

bro sobrang ganda ng MIG pang diy. if you have MIG you'll never use stick again hehe. malinis ang weld, walang slag, it's almost ready to paint na. tapos pwede sa thin material

just buy a small 15 or 20lbs tank of co2, ok na yun for DIY (for portability)

btw stay away from machines that could only do flux-core coz they're not capable of gas shielding. ok lang din naman ang fluxcore but the fluxcore wire is quite expensive, the good ones that is

[ninjababez]

bro sobrang ganda ng MIG pang diy. if you have MIG you'll never use stick again hehe. malinis ang weld, walang slag, it's almost ready to paint na. tapos pwede sa thin material

just buy a small 15 or 20lbs tank of co2, ok na yun for DIY (for portability)

btw stay away from machines that could only do flux-core coz they're not capable of gas shielding. ok lang din naman ang fluxcore but the fluxcore wire is quite expensive, the good ones that is

bro plano ko yun no need ng gas tank, kasi personal use lang talaga. given na wala ako plans ng may gas tank, may advantage parin ba mig?
i honestly thought tig lang need ng gas tank [emoji28]

Sent from my Redmi Note 9 Pro using Tapatalk

[ninjababez]

Ang mig ba bro, pwede kahit saan? Kasi nakita ko nung ginamitan ng tig ang stainless rails ko, walang kalat ng spark

Edit: nag google na ko bro, mas ok pala sya

bro yun tumira rails mo, may gas tank gamit?

Sent from my Redmi Note 9 Pro using Tapatalk

[Vodka]

bro plano ko yun no need ng gas tank, kasi personal use lang talaga. given na wala ako plans ng may gas tank, may advantage parin ba mig?
i honestly thought tig lang need ng gas tank [emoji28]

Sent from my Redmi Note 9 Pro using Tapatalk

here's my sample weld using flux core:



eto naman MIG (w/ co2 gas):



as you can see there are lots of tiny little balls in the fluxcore (aka gasless) weld. and there's slag you gotta remove. take note good fluxcore wire is expensive. cheap fluxcore is cr*p in the pic i used kiswel wire which costs like 4k for a 5kg roll. 5kg MIG wire is only P800

for hobby use i highly recommend MIG. as for fluxcore it'll give you more control compared to stick but that's about it

[dr. d]

I wouldn't if I know na negative



8 months since the lockdown wala naman pagbabago, it was only after I took my swab test na lumayo siya. Anyway, ok lang, like I said social distancing na rin. But now I understand why my Mom did not want me to let other people know that I took a swab. BFF ko nga passed by our house yesterday and brought me food, handed it over to me personally

regarding mga sumbongera. Parang yung isang member dito na nagsumbong sa mod at nung hindi pinagbigyan na i call out yung isang member throws tantrums like a toddler. How very very mature. Goes to show that mod made the right decision to ignore

"ignorance may result in many strange behaviors."

what may be a minor thing to one, might already be cause for behavior change to another.

our teacher always hammered to us,
"never assume that your patient knows what you know. you have to go down to his level of understanding, because he can not go up to yours."

[dr. d]

ano kaya bilihin ko ..

inverter mig welding machine, kahit meron nako inverter stick welding machine ..

or

floor jack na 500mm, kahit meron nako 325mm



Sent from my Redmi Note 9 Pro using Tapatalk

it does not matter what you buy now.
i have a feeling, you will end up buying both anyway, in the foreseeable near future.
perhaps you should purchase first that which you use more.

[ninjababez]

here's my sample weld using flux core:



eto naman MIG (w/ co2 gas):



as you can see there are lots of tiny little balls in the fluxcore (aka gasless) weld. and there's slag you gotta remove. take note good fluxcore wire is expensive. cheap fluxcore is cr*p in the pic i used kiswel wire which costs like 4k for a 5kg roll. 5kg MIG wire is only P800

for hobby use i highly recommend MIG. as for fluxcore it'll give you more control compared to stick but that's about it

1st pic bro, masaya nako makagawa ganyan kalinis [emoji28]
yun tumira ng gate and roof dito sa inupahan ko, galing ng scale (tama ba term?) yun mga kalat minimal.
nagtawanan nalang kami nun pinakita ko yun gawa ko. sabi nya nalang, ok lang yan kasi may trabaho ka naman and di mo lagi ginagawa [emoji28][emoji1787][emoji1787]
btw ang mahal pala mig wire, pero matanong ko narin, yun 8kg ba na wire equal to number of work done sa 8kg na stick weld?

Sent from my Redmi Note 9 Pro using Tapatalk

[ninjababez]

it does not matter what you buy now.
i have a feeling, you will end up buying both anyway, in the foreseeable near future.
perhaps you should purchase first that which you use more.

eto kinontra nako ni gf, sabi nya dami ko daw gusto na di kailangan. e.g. jack (bakit full time mechanic kana ba? diba meron kana 2)
mig welding (ilan beses gagamitin at may aayusin ka pa ba? lilibre mo nanaman repairs ng neighbors)
bahay mo pque pinag iipunan mo diba? [emoji28]

btt: naisip ko yun maliliit na purchase ko, pag inipon ko, nakakadelay ng long term plan e.g. upgrading vios to altis, and now planning to buy suv or cuv to replace altis [emoji13][emoji13]

Sent from my Redmi Note 9 Pro using Tapatalk

[dr. d]

eto kinontra nako ni gf, sabi nya dami ko daw gusto na di kailangan. e.g. jack (bakit full time mechanic kana ba? diba meron kana 2)
mig welding (ilan beses gagamitin at may aayusin ka pa ba? lilibre mo nanaman repairs ng neighbors)
bahay mo pque pinag iipunan mo diba? [emoji28]

btt: naisip ko yun maliliit na purchase ko, pag inipon ko, nakakadelay ng long term plan e.g. upgrading vios to altis, and now planning to buy suv or cuv to replace altis [emoji13][emoji13]

Sent from my Redmi Note 9 Pro using Tapatalk

you already have two not-light-duty crocodiles? tama na siguro yon...
unless you're going into the tire business, or intend to rotate tires on a very regular basis.

get rid of your sedan. get an innova.

errr...
what's your silver altis's EP?
heh heh heh.

[ninjababez]

you already have two not-light-duty crocodiles? tama na siguro yon...
unless you're going into the tire business, or intend to rotate tires on a very regular basis.

get rid of your sedan. get an innova.

errr...
what's your silver altis's EP?
heh heh heh.

yun gusto ko kasi upto 500mm na jack
yun sakin 300mm lang max [emoji28]


Sent from my Redmi Note 9 Pro using Tapatalk

[ninjababez]

you already have two not-light-duty crocodiles? tama na siguro yon...
unless you're going into the tire business, or intend to rotate tires on a very regular basis.

get rid of your sedan. get an innova.

errr...
what's your silver altis's EP?
heh heh heh.

btw bro anong ep?..lol

Sent from my Redmi Note 9 Pro using Tapatalk

[dr. d]

btw bro anong ep?..lol

Sent from my Redmi Note 9 Pro using Tapatalk

EP.
ending plate.
some used car buyers are looking for coding cars that have an acceptable last digit in the number plate.

btw,
i just had my altis's front suspension fixed. i think the parts they replaced came with the car... in 2003.
now... compared to the innova... ang ganda pala ng ride!

[papi smith]

bro yun tumira rails mo, may gas tank gamit?

Sent from my Redmi Note 9 Pro using Tapatalk

Di ko napansin bro, I mean di ko maalala

[ninjababez]

EP.
ending plate.
some used car buyers are looking for coding cars that have an acceptable last digit in the number plate.

btw,
i just had my altis's front suspension fixed. i think the parts they replaced came with the car... in 2003.
now... compared to the innova... ang ganda pala ng ride!

ah 9 bro
btw yun nakuha ko ito, sabi ko sarili ko wow plush ... yun pala palitin na shocks [emoji1787]

Sent from my Redmi Note 9 Pro using Tapatalk

[ninjababez]

Di ko napansin bro, I mean di ko maalala

oki lang bro
judging sa post ni bro vodka, mukhang malaking upgrade parin vs stick
sana makatesting muna ako hehehe

Sent from my Redmi Note 9 Pro using Tapatalk

[ray_noel]

eto kinontra nako ni gf, sabi nya dami ko daw gusto na di kailangan. e.g. jack (bakit full time mechanic kana ba? diba meron kana 2)
mig welding (ilan beses gagamitin at may aayusin ka pa ba? lilibre mo nanaman repairs ng neighbors)
bahay mo pque pinag iipunan mo diba? [emoji28]

btt: naisip ko yun maliliit na purchase ko, pag inipon ko, nakakadelay ng long term plan e.g. upgrading vios to altis, and now planning to buy suv or cuv to replace altis [emoji13][emoji13]

Sent from my Redmi Note 9 Pro using Tapatalk

Parang for me bruh, tinanong nya kung saan na yung pangkasal nyo... [emoji1787][emoji1787][emoji1787]

Try mo kaya, MagLaan ka sa mga bagay na yan tapos maglaan ka din pang kasal nyo...hehe.. aaprove yan..


Sent from my iPhone using Tapatalk

[ninjababez]

Parang for me bruh, tinanong nya kung saan na yung pangkasal nyo... [emoji1787][emoji1787][emoji1787]

Try mo kaya, MagLaan ka sa mga bagay na yan tapos maglaan ka din pang kasal nyo...hehe.. aaprove yan..


Sent from my iPhone using Tapatalk

masyado sya independent at ma pride para itanong sakin yan lol
she wont beg nor ask for marriage, maging faithful lang ako alam kong masaya na sya
btw yun house na plano ko pagawa sa dumaguete, or whatever property maipon ko doon ay sa kanya ko lahat papangalan

Sent from my Redmi Note 9 Pro using Tapatalk

[EQAddict]

masyado sya independent at ma pride para itanong sakin yan lol
she wont beg nor ask for marriage, maging faithful lang ako alam kong masaya na sya
btw yun house na plano ko pagawa sa dumaguete, or whatever property maipon ko doon ay sa kanya ko lahat papangalan

Sent from my Redmi Note 9 Pro using Tapatalk

Dont make decisions based on guilt or pity hehe. You will regret them way later on.


Your money, your investment, your land, your name in the title...UNTIL you are married.

Bro, if anything goes wrong and she leaves you for whatever reason (after you have put the title in her name)...you would have lost so much time, money and years. Very very hard to recover the prime earning years of our lives as we get older. Small chance it will happen...but a chance nonetheless.

And god forbid, if something happens to her....inheritance laws and taxes and lawyers (as well as her family members) are a b*tch as Cathy will so aptly point out.





Sent from my SM-N975F using Tapatalk