Cheap and Good Quality Grass Cutters

**12vdc** · March 5th, 2019 02:48 PM

^Safe naman bro, always wear your bag upfront and yung suotin mo pang divi getup. wag yung pormang prang mag oopisina sa makati.. hehe

**Athrunzala** · March 5th, 2019 09:33 PM

Originally Posted by 12vdc

^Safe naman bro, always wear your bag upfront and yung suotin mo pang divi getup. wag yung pormang prang mag oopisina sa makati.. hehe

Maraming salamat for the advice pareng 12vdc!

**Athrunzala** · March 7th, 2019 09:42 AM

Guys, tanong ko lang ano ibig sabihin ng "lean" as in "lean carburetor adjustment". Does "lean" mean using more fuel so as to stop the engine from dying out?

**12vdc** · March 7th, 2019 09:46 AM

more fuel = running rich
more air to fuel = running lean

**Athrunzala** · March 7th, 2019 10:11 AM

Originally Posted by 12vdc

more fuel = running rich
more air to fuel = running lean

Salamat pareng 12vdc! Ngayon gets ko na, kaya pala sabi nila yung piston/ring mabilis na nasisira kapag lean"running lean" kasi yung piston mo hindi sufficiently na rerelubricate ng oil.

**dr. d** · March 7th, 2019 10:22 AM

Originally Posted by Athrunzala

Salamat pareng 12vdc! Ngayon gets ko na, kaya pala sabi nila yung piston/ring mabilis na nasisira kapag lean"running lean" kasi yung piston mo hindi sufficiently na rerelubricate ng oil.

errr...
grass cutters or automobiles?

for grass cutters with two-stroke engine, i suppose so.

for automobiles,
i think, it's not really the lubrication, as it is the combustion.

but what about those electric grass cutters? are they ok for ordinary lawn work?

**Athrunzala** · March 7th, 2019 10:35 AM

Originally Posted by dr. d

errr...
grass cutters or automobiles?

for grass cutters with two-stroke engine, i suppose so.

for automobiles,
i think, it's not really the lubrication, as it is the combustion.

but what about those electric grass cutters? are they ok for ordinary lawn work?

Dr. D, balik niyo po yung 3 points na binura niyo, malaking tulong din yun and logical too...

**dr. d** · March 7th, 2019 10:41 AM

Originally Posted by Athrunzala

Dr. D, balik niyo po yung 3 points na binura niyo, malaking tulong din yun and logical too...

i decided against it, po.
"wrong thread".
but thank you.

**Athrunzala** · March 16th, 2019 11:25 PM

pareng 12vdc, doon sa TD40 Carburetor, how do you use the idle adjusting screw, kapag namamatay ang brush cutter kapag idle siya, to the left o to the right direction po ba iaadjust ang adjusting screw?

**12vdc** · March 25th, 2019 09:54 PM

^Parang pakanan idle-up, idont exactly remember. Basta sa idling problem linis carb at filter. Iwasan din yung may stale fuel sa carb kung matagal hindi gagamitin nagkakaroon ng mineral deposits.