New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Results 1 to 7 of 7
  1. Join Date
    Nov 2009
    Posts
    3
    #1
    sir,

    my car got flooded last month. dinala namin sa talyer at pinaayos.tumatakbo na sya ngayon. the problem is yung speedometer at RPM nya ay hinde gumagana. sira na ba ito o may mga sensor o fuse lang na di gumagana. sabi ng mechanic sira na daw. he charges us 37 k lahat sa cleanining at repair ng computer box daw...sa mazda familia ko.

  2. Join Date
    Oct 2002
    Posts
    15,528
    #2
    before it was flooded, gumagana ba yung tach and speedo? most probably, sensor-related problem yan dahil sabay nasira.

  3. Join Date
    Jul 2009
    Posts
    4,078
    #3
    Parang mahal ata singil sa iyo .Patignan mo sa ibang mechaniko para sa second opinion kung ano ang findings nila.

  4. Join Date
    Nov 2009
    Posts
    3
    #4
    Quote Originally Posted by 1D4LV View Post
    before it was flooded, gumagana ba yung tach and speedo? most probably, sensor-related problem yan dahil sabay nasira.

    yes sir,

    lahat po gumagana.pagkatapos bahain at ayusin sa shop, yun na lang ang hinde gumagana. ano kayang sensor ang sira d2.


    sir speed,

    yung 37k ay binayad ko sa mechanic as payment sa pag ayos nya sa car ko.palit sya ng belts at oil.saka yung pinampaayos nya daw sa computer box ko. ang hinde na lang nya nagagawa ay yung speedometer at RPM nya. any idea kung sensor o yung assembly ang sira.tnx

  5. Join Date
    Dec 2008
    Posts
    73
    #5
    hmm your familia gauge cluster has its own microprocessor,
    you can check if the cluster is defective by entering its diagnostic mode:
    1. disconnect negative terminal of car battery.
    2. open driver side door, close other 3 doors then wait for 30 sec.
    3. reconnect battery
    4. turn ignition key to ON
    5. push driver side DOOR SWITCH 3 times (eto yung switch na tinatamaan pag sinasarado ang pinto)
    6. push odometer/trip switch 3 times sa gauge cluster
    7. you should see DTC 00 displayed sa digital odometer
    8. push odometer/trip switch many times until will you see DTC 12.
    9. Speedometer should move to 220km/h!, after a moment the speedometer should move to about 60kmh
    10. push odometer/trip switch again, you will see DTC 13.
    11. Tachometer should move to 8000RPM!, after a moment the tach should move to about 3000RPM.

    If your speedo or tach didnt move, replace the whole cluster.
    Kung gumalaw naman maybe sensor ploblem ang culprit,

    Now the speedo gets it reading from the ABS computer (GLXi model only).
    Kung naka ON palagi ang ABS light mo, check the two front sensors malapit sa front CV joints.

    If OK ang sensors replace the ABS computer. located above the fuse box sa drivers cabin, malamang nabaha din yan

  6. Join Date
    Nov 2009
    Posts
    3
    #6
    sir zantets,

    thank you for this very informative reply,

    nasa kapatid ko na kase yung car, yung abs nya ay nakailaw,paano ko machecheck if okey yung sensor,kailangan ko na ba bumili nun, do you have any idea kung paano nachecheck if okey pa yung sensor.


    Quote Originally Posted by zantets View Post
    hmm your familia gauge cluster has its own microprocessor,
    you can check if the cluster is defective by entering its diagnostic mode:
    1. disconnect negative terminal of car battery.
    2. open driver side door, close other 3 doors then wait for 30 sec.
    3. reconnect battery
    4. turn ignition key to ON
    5. push driver side DOOR SWITCH 3 times (eto yung switch na tinatamaan pag sinasarado ang pinto)
    6. push odometer/trip switch 3 times sa gauge cluster
    7. you should see DTC 00 displayed sa digital odometer
    8. push odometer/trip switch many times until will you see DTC 12.
    9. Speedometer should move to 220km/h!, after a moment the speedometer should move to about 60kmh
    10. push odometer/trip switch again, you will see DTC 13.
    11. Tachometer should move to 8000RPM!, after a moment the tach should move to about 3000RPM.

    If your speedo or tach didnt move, replace the whole cluster.
    Kung gumalaw naman maybe sensor ploblem ang culprit,

    Now the speedo gets it reading from the ABS computer (GLXi model only).
    Kung naka ON palagi ang ABS light mo, check the two front sensors malapit sa front CV joints.

    If OK ang sensors replace the ABS computer. located above the fuse box sa drivers cabin, malamang nabaha din yan

  7. Join Date
    Oct 2002
    Posts
    2,307
    #7
    hi,

    please log on to mazdatech.org and search the recommended shops thread. meron dun, tonner ang username afaik, who has a service where he plugsin to your obd jack and reads a car's problems. mura pa sumingil. afaik, dami na niya natulungang mga lumubog sa baha.
    Got Mazda?-http://www.MAZDAtech.org [SIZE="1"]est. 2000[/SIZE]
    got mazda 2? -> mazda2ners

dec 99 glxi familia