Results 4,241 to 4,250 of 4472
-
August 9th, 2020 07:24 PM #4241
You don't want experiments? Wheelers have dropped a number of BM/BNs(2 below among them). Reviews by Mown3rs have been nothing but positive. Owner is pretty old school & involved, they say. Trustworthy.
And before you go, grab a pair of Genuine Mazda PN: KDY534081 spring protectors from the dealership. Stick em 138mm from the top end of the 2 front springs. You won't wanna go w/o them. There's a chance noises will force you to redo them.
-
Verified Tsikot Member
- Join Date
- Jan 2020
- Posts
- 68
August 9th, 2020 09:37 PM #4242
-
Verified Tsikot Member
- Join Date
- Jan 2020
- Posts
- 68
August 10th, 2020 12:26 AM #4243Thanks! I like old school. Will give them a ring tom! And would get the protector from mazda makati. This is just for the front right? As always thanks sir Travs!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
August 10th, 2020 12:52 AM #4244
Yup, just the fronts, sir! Looking forward to them pics!
And if you can get a pair of SPC EZ Cam 81260 front camber bolts...Enjoy some tweakability.
Specialty Products Company | SPC Alignment | The Automotive Alignment Leaders
Sent from my SM-G970F using Tapatalk
-
Verified Tsikot Member
- Join Date
- Jan 2020
- Posts
- 68
August 10th, 2020 12:59 PM #4245
-
August 10th, 2020 03:00 PM #4246
-
Verified Tsikot Member
- Join Date
- Jan 2020
- Posts
- 68
August 12th, 2020 11:05 AM #4247Pretty stoked with the spring. Not sure how many days it will settle but satisfied with the height and pretty satisfied with the comfort despite the horrendous road from EDSA QC to Makati.
and kudos to wheelers too. Friendly staff and affordable rates.
Highly recommended. Got them changed for 1200php for all 4 springs for an hour of work as opposed to Rapide’s 6k or Bridgetone for 3k and halfday of waiting time.
The rubber protectors were added at the back and not on the front sir [mention]travajante [/mention] though I did not hear clonking noise at the front, I heard it at the back despite the rubber but it was only once from the entire 20-25min drive. Thanks!
Sent from my iPhone using Tapatalk
-
August 12th, 2020 04:48 PM #4248
-
Verified Tsikot Member
- Join Date
- Jan 2020
- Posts
- 68
August 12th, 2020 06:05 PM #4249I was. They said it should be at the back though I insisted that it should be front. They said, they have done it before and if I hear clonking noise, I should go back. I think I have to find out. I will be using it the entire week and I should observe the front before scheduling for an alignment.
I even pointed out that there is already rubber protector on the springs at the back. Mindblown
Sent from my iPhone using Tapatalk
-
August 12th, 2020 07:25 PM #4250
the triumph of man over... man!, using the crudest of implements (by modern standards).
Traffic!