2014 Mazda 3

[travajante]

Yup yup! Was trying to avoid buying new lugnuts.

No rubbing issues so far lock to lock. Will try a full load soon.



Sent from my SM-A605G using Tapatalk

Grats!!!!!

Sent from my SM-G970F using Tapatalk

[JohnM]

Grats!!!!!

Thanks bai! Your input has been very invaluable

[travajante]

Thanks bai! Your input has been very invaluable

Yours as well, brother John. Amazed by your patience to get moddin'!

Sent from my SM-G970F using Tapatalk

[JohnM]

What's the recommended tire pressure for 17s? The door sticker says 36psi for 16s with light load.

Any recommended LED brake bulbs for the 1.5? Preferably Lazada :D

[Archerfish]

What's the recommended tire pressure for 17s? The door sticker says 36psi for 16s with light load.

Any recommended LED brake bulbs for the 1.5? Preferably Lazada :D

Perhaps you should stick with that pressure, or a little higher. You don't want your new wheels to have a few "battle scars". With the stock 19" that came with the '6', I have accepted the fate.

[JohnM]

Perhaps you should stick with that pressure, or a little higher. You don't want your new wheels to have a few "battle scars". With the stock 19" that came with the '6', I have accepted the fate.

Scary ang 19s haha. Kasya pa naman sana sa 3.

Strange that our crossover requires 33/32 only. It's one step thicker lang.

Just got a shot of my actual mileage: 41,338 kms for a daily driver bought in 2014


Sent from my SM-A605G using Tapatalk

[Egan101]

Scary ang 19s haha. Kasya pa naman sana sa 3.

Strange that our crossover requires 33/32 only. It's one step thicker lang.

Just got a shot of my actual mileage: 41,338 kms for a daily driver bought in 2014


Sent from my SM-A605G using Tapatalk

Puwede yan 19 kung gugustuhin. Ang tanong - gusto mo ba?

Ok lang naman same yung pressure gamitin between 16s and 17s. Just follow the suggested pressure indicated on the inner portion of the driver side door.

Yung 18s ng XT, 32 lang nga suggested ng Subie. I observed that it is better to raise it to 34 on pure highway driving conditions.


Sent from my iPhone using Tapatalk

[JohnM]

Puwede yan 19 kung gugustuhin. Ang tanong - gusto mo ba?

Ayaw haha. Sa dami ng lubak dito mahirap na.

34 lang ako ngayon. Baka taasan ko rin. Sa 16 kasi ramdam ang bigat ng manibela if the pressure goes below 34.

Hubcentric rings arrived. Hope they fit

[JohnM]

Nice. Which GLs? If hub bore's 73.1mm, you can grab a set of 73.1-67.1mm hub rings.
4Pcs Aluminum Centric Spigot Hub Rings Wheel Spacer Set 67.1mm ID To 73.1Mm OD
Good to have....1 less vibration-cause to think about.

73.1-67.1 hubcentric rings fit perfectly. One less thing to worry about

Mechanic suggested getting 19x1.5 lug nuts for more space around them.

[travajante]

73.1-67.1 hubcentric rings fit perfectly. One less thing to worry about

Mechanic suggested getting 19x1.5 lug nuts for more space around them.

Sent from my SM-G970F using Tapatalk