2014 Mazda 3

**vinrem** · October 29th, 2019 08:35 AM

Originally Posted by JohnM

I mean baka yan yung speaker ng reverse sensor.

Sent from my SM-A605G using Tapatalk

Ah ok hehehe

Sent from my ONEPLUS A6003 using Tapatalk

**JohnM** · October 29th, 2019 09:11 AM

Sinilip ko kanina yung area ng jack. May rubber louvers sa wall which is part of the venting system para di pumutok tenga mo when you close the door. Otherwise wala akong nakitang horn. Could be in a different location depending sa pinanggalingang factory.

**vinrem** · October 29th, 2019 09:19 AM

Originally Posted by JohnM

Sinilip ko kanina yung area ng jack. May rubber louvers sa wall which is part of the venting system para di pumutok tenga mo when you close the door. Otherwise wala akong nakitang horn. Could be in a different location depending sa pinanggalingang factory.

It's in your left hand side sir, left side of the jack, you need to open the cover to see it, anyway, baka nga back up sensor lang un hehehe

Sent from my ONEPLUS A6003 using Tapatalk

**JohnM** · October 29th, 2019 09:43 AM

Originally Posted by vinrem

It's in your left hand side sir, left side of the jack, you need to open the cover to see it, anyway, baka nga back up sensor lang un hehehe

Ah sige will check that out kung magpalit na rin ako ng bulbs. Ang alam ko kasi the BCM for the reverse cam is on the driver side of the trunk wall.

**vinrem** · October 29th, 2019 10:00 AM

Originally Posted by JohnM

Ah sige will check that out kung magpalit na rin ako ng bulbs. Ang alam ko kasi the BCM for the reverse cam is on the driver side of the trunk wall.

When replacing your turn signal to an LED, you need to buy a canbus para you won't get an error sa dash, yung brake light and reverse light no need to add na, turn signal lang, I haven't replaced my turn signal yet kasi walang sabitan or a place to put the canbus sa area na yun, I'm still studying kung saan pwde ko isabit kaya na open ko ang area na yun and saw an additional horn.

Sent from my ONEPLUS A6003 using Tapatalk

**JohnM** · October 29th, 2019 10:21 AM

Originally Posted by vinrem

When replacing your turn signal to an LED, you need to buy a canbus para you won't get an error sa dash, yung brake light and reverse light no need to add na, turn signal lang, I haven't replaced my turn signal yet kasi walang sabitan or a place to put the canbus sa area na yun, I'm still studying kung saan pwde ko isabit kaya na open ko ang area na yun and saw an additional horn.

Yep I already asked one of the HID upgrade shops dito re the turn signal. 6k ata ang quote nya for the canbus system. Gone are the days na palit socket lang may always on corner light ka na

**vinrem** · October 29th, 2019 12:07 PM

Originally Posted by JohnM

Yep I already asked one of the HID upgrade shops dito re the turn signal. 6k ata ang quote nya for the canbus system. Gone are the days na palit socket lang may always on corner light ka na

Wow, 6k, I bought it at only 120rmb for set of 2 in taobao, yun nga lang, I have to install it by myself pero madali lng naman, problem is where to place it kasi wala akong nakikitang lugar where I can clamp the canbus.

Sent from my ONEPLUS A6003 using Tapatalk