Results 11,531 to 11,540 of 12058
-
October 9th, 2020 09:17 AM #11531
What tire model would be the closest to the stock 2014/2015 tires of 1.5L? Planning on getting them all replaced and want the closest thing to stock.
-
Verified Tsikot Member
- Join Date
- Sep 2019
- Posts
- 107
-
Verified Tsikot Member
- Join Date
- Sep 2019
- Posts
- 107
October 9th, 2020 05:37 PM #11533If same size nun stock pero ibang manufacturer try to check Michelin Pilot Sports, Bridgestone Potenza or any max performance tires sir.
Sent from my SM-G980F using Tsikot Forums mobile app
-
Verified Tsikot Member
- Join Date
- Nov 2019
- Posts
- 35
October 25th, 2020 10:32 PM #11534Any shop recommendations that sells this product? This one is from Malaysia kasi or any other aftermarket alternatives?
https://www.google.com/amp/s/shopee....756.2444678744
This might help others as well na hindi mahanap yun clunking noise whenever they go over bumpy roads.
Sent from my SM-G935F using Tapatalk
-
October 26th, 2020 12:18 AM #11535
How many kms clocked on your BM3, sir? Never had to resort to those advertised sleeves. Some makes have pins w/ anti-rattle rubber sleeves. Check this vid..
What is that piece of rubber "tube" on the lower brake caliper pin? | Honda | Toyota | Lexus | Acura - YouTube
I'd eliminate the noise by proper brake maintenance w/ the proper brake lube, not sleeving. If clunk persists, look for it elsewhere. The lone noise I had was long silenced by the spring protectors.
While at it, try applying(repack into spray bottle) engine stop-leak additives, like AT 205 Reseal, externally....not just as stop squeak lube, but conditioner, too, for your rubber suspension parts & bushes. Spray some over your steering rack/drive shaft boots, too. Stop-leaks can revitalize & extend the service life of rubber components.
Sent from my SM-G970F using Tapatalk
-
Verified Tsikot Member
- Join Date
- Nov 2019
- Posts
- 35
October 26th, 2020 12:38 AM #11536Odo is currently at 37k sir. Clunking noise came from this part 100%. It was fixed temporarily since Feb and the noise never came back. I just want to replace it with a brand new one for added peace of mind
Sent from my SM-G935F using Tapatalk
-
October 26th, 2020 12:44 AM #11537
-
Verified Tsikot Member
- Join Date
- Nov 2019
- Posts
- 35
October 26th, 2020 12:52 AM #11538
-
October 26th, 2020 01:01 AM #11539
-
December 1st, 2020 10:19 PM #11540
This should give me hope, i almost gave up on finding that d*mn annoying noise, i hope this solves it, already installed and replaced those rubber insulators on my springs still didn't solved the problem
Sent from my TA-1041 using Tsikot Forums mobile app
3M Color Stable series are all above 50% TSER. RFID readable through the tint, stays good for...
What's the best car tint brand and color?